*UPDATE BAD EMS* Car will not start! 1st startup
#1
Thread Starter
*UPDATE BAD EMS* Car will not start! 1st startup
Hey guys tried starting my car today with AEM EMS it will take a couple cranks to turn over, it turns over once, then dies. I'm at a loss for what it could be... any ideas are GREATLY appreciated.
#7
Thread Starter
Tried the other map from slimjim too... same issue.
However, just discovered 3 of the 4 spark plugs were fouled out. Not sure why that happend so quickly... perhaps since the motor might have been flooded with fuel from the priming? Not sure... we're going to replace the plugs and try again... I'll keep posting the progress.
However, just discovered 3 of the 4 spark plugs were fouled out. Not sure why that happend so quickly... perhaps since the motor might have been flooded with fuel from the priming? Not sure... we're going to replace the plugs and try again... I'll keep posting the progress.
Trending Topics
#8
Do you have the proper injectors (675cc) identified in your AEM EMS? If you don't this could be causing your problem as the fuel system may be trying to deliver too little or too much fuel.
#10
Originally Posted by FurY,Jul 14 2007, 01:11 PM
I checked with inlinepro, I have the siemens deka injectors 675cc... it looks like in the map they sent me, they selected the 630cc siemens deka injectors since the next size up is 756cc.