FlashPro O2 cat delete
#142
My CEL came on after about 15 min after the FlashPro install. Happened during a partial throttle run in 6th gear into the Vtec window. It went away on its own after turning off the car and a new Map update. Came back 3 starts later (but without the light actually coming on - I saw it in my FP datalog).
It came on at 3700RPM under 0% throttle in 6th after a hard 3rd gear run up to 8300 rpm and then a quick shift to 4th, then to 6th to let the car coast down. AFR was 29 as it was coming down. Maybe the O2 really is screwing up and sending a false number (I see a lot of numbers as high as 29-30 when coasting with no throttle and/or downshifting)
I ordered a new sensor to see if that fixes it. I really don't see this being a mechanical equipment thing though.
It came on at 3700RPM under 0% throttle in 6th after a hard 3rd gear run up to 8300 rpm and then a quick shift to 4th, then to 6th to let the car coast down. AFR was 29 as it was coming down. Maybe the O2 really is screwing up and sending a false number (I see a lot of numbers as high as 29-30 when coasting with no throttle and/or downshifting)
I ordered a new sensor to see if that fixes it. I really don't see this being a mechanical equipment thing though.
#143
Originally Posted by TheNick,Apr 7 2010, 09:55 AM
My CEL came on after about 15 min after the FlashPro install. Happened during a partial throttle run in 6th gear into the Vtec window. It went away on its own after turning off the car and a new Map update. Came back 3 starts later (but without the light actually coming on - I saw it in my FP datalog).
It came on at 3700RPM under 0% throttle in 6th after a hard 3rd gear run up to 8300 rpm and then a quick shift to 4th, then to 6th to let the car coast down. AFR was 29 as it was coming down. Maybe the O2 really is screwing up and sending a false number (I see a lot of numbers as high as 29-30 when coasting with no throttle and/or downshifting)
I ordered a new sensor to see if that fixes it. I really don't see this being a mechanical equipment thing though.
It came on at 3700RPM under 0% throttle in 6th after a hard 3rd gear run up to 8300 rpm and then a quick shift to 4th, then to 6th to let the car coast down. AFR was 29 as it was coming down. Maybe the O2 really is screwing up and sending a false number (I see a lot of numbers as high as 29-30 when coasting with no throttle and/or downshifting)
I ordered a new sensor to see if that fixes it. I really don't see this being a mechanical equipment thing though.
#144
Originally Posted by scareyourpassenger,Mar 26 2010, 08:12 AM
In the united states there is an emissions warranty. It all depends if Canada has the same rules. Also if you have any safety equipment issues those are lifetime such as a seatbelt.
EPA reference.
http://www.epa.gov/oms/consumer/warr95fs.txt
EPA reference.
http://www.epa.gov/oms/consumer/warr95fs.txt
Anyways, I looked through that reference and it explicity says the items covered for 8/80 are the ECU, the OBD, and the catalytic converter. It says O2 sensors and other things are only covered for 2/24 by the EPA requirements.
But with the TSB, you can probably convince Honda to do it if you talk really nice to them.
#145
Originally Posted by gernby,Apr 7 2010, 11:41 AM
What code are you getting? Are you just assuming that it is related to the O2 sensor that's being talked about in this thread?
#146
Originally Posted by TheNick,Apr 7 2010, 03:22 PM
P2A00. Why else would I post in this thread?
#147
Originally Posted by gernby,Apr 7 2010, 04:21 PM
People post irrelevant info all the time without knowing it. I just wanted to make sure your info was relevant, since your experience really points the finger at the FlashPro as the culpret pretty hard.
#148
I replaced the O2 sensor with a brand new one. Drove it for 30-40 miles and no P2A00 code on the FP. Performance is no different. Now I'm getting a P0420 Cat System Efficiency Below Threshold (Bank 1) code on the FP but there is NOT a CEL on my dash.
<- Confused.
<- Confused.
#150
Originally Posted by TheNick,Apr 10 2010, 12:45 AM
I replaced the O2 sensor with a brand new one. Drove it for 30-40 miles and no P2A00 code on the FP. Performance is no different. Now I'm getting a P0420 Cat System Efficiency Below Threshold (Bank 1) code on the FP but there is NOT a CEL on my dash.
<- Confused.
<- Confused.