Focal Speakers?
#1
Focal Speakers?
So i bought a pioneer headunit deh62000bt which fit and installded fine, but need the modifry thing to make the controls work, and i bought FOCAL 165A1 Component Speakers and they dont FIT! they go too deep? Has anyone tried these speakers? Help?
#5
If you want to make one, it's pretty easy. You can, for instance, just get a jigsaw and a small sheet of 3/4" thick MDF from Lowe's. The MDF is just a few bucks. Trace the perimeters of the factory plastic thingie the speaker is bolted into and the inside speaker diameter with a sharpie. This will give you cutting outlines. It will be a roughly donut type shape. Cut it out with the jigsaw, then paint it or seal it if you want to. That's your spacer. Pre-drill holes for the mounting points, then screw it to the door, and screw the speaker into it.
#7
I will be installing the less expensive Polyglass 165VR in my S. How deep of a spacer did you use for your installation? I'll check the depth specs of the 166 k2p. I suppose I could pull my door panels and check, but I would prefer to get everything I need ready before hand. If the answer is already available why not . Thanks in advance.
Trending Topics
#8