First 7" Alpine Double DIn Installed...LQQK!
#52
Registered User
Thread Starter
We need the car to physically be here since everything is an integral part of the design process for things to fit. We don't just build a bezel because the whole being cut has to match and the duct behind has to be re-molded too. This is a very extensive process with a lot of hours to finish and look nice.
#53
anybody seen this concept yet? i found it online so i have to idea anything about it.
http://www.ebay.com/itm/Honda-S2000-...US_Cars_Trucks
http://www.ebay.com/itm/Honda-S2000-...US_Cars_Trucks
#54
Sponsor
We are currently working on a iPad mini flush dash mount that hopefully will not require any drilling into the dash. So many projects here so will try to get some things going soon.
Some of the installs on here we did so long ago it's good to see this thread pop back up!
2003 AP1: That setup doesn't really flow with the dash, not sure what those 2 things are but they look like cup holders and really disrupts the symmetry of the dash.
Double DIN installs are nice but the negative is they need to cut into the dash meaning it's married to the car permanently. We feel tablets are the wave of the future so stay tuned.
BONUS: We have an extra s2000 dash sitting here on the work bench so for those of you who want to get this done, we no longer need your car and can do this remotely. Basically you just order and pay for the work (Send us your tablet) and we will do the full integration here and send you a perfect bezel with your tablet back. Turn-around time is roughly 2-3 weeks depending on work load.
PM us if you want to tackle this for your car!
here's our shop NSX with the iPad mini flushed behind a magnetic trim ring (it can be popped off and taken with you to avoid theft issues)
Some of the installs on here we did so long ago it's good to see this thread pop back up!
2003 AP1: That setup doesn't really flow with the dash, not sure what those 2 things are but they look like cup holders and really disrupts the symmetry of the dash.
Double DIN installs are nice but the negative is they need to cut into the dash meaning it's married to the car permanently. We feel tablets are the wave of the future so stay tuned.
BONUS: We have an extra s2000 dash sitting here on the work bench so for those of you who want to get this done, we no longer need your car and can do this remotely. Basically you just order and pay for the work (Send us your tablet) and we will do the full integration here and send you a perfect bezel with your tablet back. Turn-around time is roughly 2-3 weeks depending on work load.
PM us if you want to tackle this for your car!
here's our shop NSX with the iPad mini flushed behind a magnetic trim ring (it can be popped off and taken with you to avoid theft issues)
__________________
Contact us via PM or visit our social media sites below!
Youtube: https://www.youtube.com/@euroboutique/videos
WEBSITE: https://euroboutique.us/collections/nsx
Follow-Us Instagram/Facebook: https://www.instagram.com/euroboutique/
Contact us via PM or visit our social media sites below!
Youtube: https://www.youtube.com/@euroboutique/videos
WEBSITE: https://euroboutique.us/collections/nsx
Follow-Us Instagram/Facebook: https://www.instagram.com/euroboutique/
Thread
Thread Starter
Forum
Replies
Last Post