need help to restore #151
#12
Nice CR! If you have not already, check the valve clearances asap. 06+ S2000 tend to get tight exhaust valves. Billman (well known s2000 guru) recommends checking the valves on 06+ cars after 15-20K miles. Enjoy it in great health.
The following users liked this post:
acuhon (03-18-2021)
#13
Will check valves over the weekend. Thanks for heads up. Anything else would be good to check before first autoX ?
#14
https://www.s2ki.com/forums/s2000-cr.../#post21276586
This thread might help you located some CR specific parts, it's in the FAQ
This thread might help you located some CR specific parts, it's in the FAQ
The following users liked this post:
acuhon (03-19-2021)
#15
https://www.s2ki.com/forums/s2000-cr.../#post21276586
This thread might help you located some CR specific parts, it's in the FAQ
This thread might help you located some CR specific parts, it's in the FAQ
Thanks for that link. You saved me a lot of time looking for parts . Made first big order and hope that some parts will show up.
If you gone be at NSXPO I owe you a beer or two.
#17
Hey buddy, I have a hardtop stand rack OEM with OEM Hardtop cover, as well as OEM CR car cover with bag. I also have the entire spare tire inflator kit OEM, OEM cargo net for trunk, OEM ashtray, all OEM manuals, lugnuts and wheel locks OEM, NEW OEM shift knob, OEM seat back cover very rare, and a few other OEM parts, the little dumb things that break like the center console drink separator. I had CR BB #65. As well as I have the OEM side covers in BB color when roof is off.
The following users liked this post:
acuhon (08-25-2022)
The following users liked this post:
acuhon (08-25-2022)
#19
it took me years to find all the CR parts I needed 6 yrs ago.. it's even harder to find these days...
have you checked you have hard top void cover? this is the part to cover the hole when HT is removed.
have you checked you have hard top void cover? this is the part to cover the hole when HT is removed.
#20
acuhon@aol.com