copmagnet82

does your front rub with a spacer that big?

Jack_in_the_Box

Nope, I'm running 225s up front as well, BUT my front fenders were rolled from my previous wheels so that is probably why I don't rub.

t-o_double_d

I just picked up the st40 kit second hand this weekend and mocked it all up to check clearances... From the seller I also got a set of the TSW nurburgrings that are the 17x9 which obviously fit... however my other 2 sets of wheels are stock ap2v1 wheels and a set of 17x8.5 oz racing alleggerita hlt +59

I do however have a set of H&R spacers that are 10mm 15mm with extended studs... when using the 10mm spacers the ap2v1's clear by about 2.5mm and the oz racing wheels clear by plenty (around 5mm if not more.)

just thought I would share... if anyone is interested in pics and i will be happy to share some later once i get working more on them... the next few days i will be cleaning them up and possibly painting them

myflys2k

Are you sure those spacers are 10mm? Everyone else on this forum say that you need a 17mm spacer to clear the front ap2v1 rim...including myself.

06Estukay

Yep, I second that. 10mm isn't enough to clear stock ap2v1/v2 rims.

t-o_double_d

they are 15mm not 10mm...

Back S2k

Skimmed the whole thread and didn't see anything on the buddy club p1 wheels, they seem like they would clear the 328kit 17x9 et45.

goldenfri

I have two sets of these wheels, one staggered (17x8 +45 in the front), one non-staggered (17x9 +63 in the front) and I just picked up the 328 stop tech kit. I think the +63s are going to need some significant spacers, 17x8 +45 is going to need something but not nearly as much, but I need to do more measuring before I buy spacers. I'll post in here when I find out for sure what is needed.

Back S2k

^ keep us posted. If anyone has info on the p1's in 17x9+45 please chime in although If you figure the 17x8+45 will need a spacer my guess would be that the 9 will too.

t-o_double_d

just got the stoptech kit hooked up and bled... with my 15mm H&R spacers with extended studs and my AP2V1's clear with no issues... took it out for a test drive with no issues