funat9000rpm

I have checked this thread and have not yet found the answer to the age-old question: Does the 328mm kit clear Ap2V1s?

Thanks!!

TerminatioN

Definitely not without a spacer...

The bigger question would be, how much of a spacer would it require to fit?

06Estukay

Guys, it's been talked about a lot... It's confirmed that the ap2v2's require 17mm spacers. Don't think ap2v1 will be much different.

TerminatioN

Any updates on this?

markhs2

Last day for CE28 custom for S2K to clear BBK

https://www.s2ki.com/s2000/topic/976...#entry22078122

bj84

Work vs-xx 8 50offset anyone know if there gonna clear ? Thanks

MMisencik157

17x9 +42 Rota Grids clear by a mile.

Broman_The_Swede

I borrowed a subaru sti rims with machined center hole to test if it would fit over stoptech bbk 328x28.
It fitted exactly with only 0.3 mm to spare.
With a small spacer, it will work.
The rim is 17x8 +53 5/114,3

torro78

I just purchase stoptech trophy's yesterday. Just curious, has anyone installed 355mm on there s2k's, and do you have any pics.

tOs

Can you share more details on fender clearance and the type of spacer you are using?

I wanna know if Advan RZ (the back mounting face) able to fit those hub centric spacer adaptor?
I was previously using a 10mm KICs spacer adaptor on my RE30 (17x7.5 ET50) to clear the Stoptechs 328mm BBK..... and it cleared with a bare 2mm or so only

If I install Advan RZ, not sure if this set of rim is able to accomodate the protruding bolts beyond the 10mm spacer from the original hub of the car.

And I think the front tyres are going to scrub the fender with this setup.