How low are u with your S2k?
#1
How low are u with your S2k?
Hi,
wanted to start a thread here on how low each and everyone is with their S2K's. This is not supposed to be a thread on which suspension is the best etc.
Only a thread where each and everyone can share their individual setup of suspension and combination of the following:
- Wheels
- Tyres (brand, width etc.)
- Suspension (Springs, coilovers etc.)
- Ride height measured from ground to fender or fender to center of the wheel
- And maybe how many fingers gap from fender to tire
- Fender work (rolled, pulled or flared)
- Alignment
And finally always post with pics. so that each and everyone has a chance to see the actual setup!
wanted to start a thread here on how low each and everyone is with their S2K's. This is not supposed to be a thread on which suspension is the best etc.
Only a thread where each and everyone can share their individual setup of suspension and combination of the following:
- Wheels
- Tyres (brand, width etc.)
- Suspension (Springs, coilovers etc.)
- Ride height measured from ground to fender or fender to center of the wheel
- And maybe how many fingers gap from fender to tire
- Fender work (rolled, pulled or flared)
- Alignment
And finally always post with pics. so that each and everyone has a chance to see the actual setup!
#2
My Setup and how a post should look
- Volk CE28N Genesis
Front: 7.5x17 ET50 with H&R 10mm DRS Spacers
Rear: 9.0x17 ET63
- OEM Bridgestone 215/45 & 245/40
- Buddy Club N+ Spec Coilovers
- Height: Fender - Center of the wheel: Front: 13 inches Rear: 13.4 inches
- Finger Gap: Front: 2 snug fingers & Rear: 2 1/2 fingers
- No fender work
- Alignment: UK Optimum
- Volk CE28N Genesis
Front: 7.5x17 ET50 with H&R 10mm DRS Spacers
Rear: 9.0x17 ET63
- OEM Bridgestone 215/45 & 245/40
- Buddy Club N+ Spec Coilovers
- Height: Fender - Center of the wheel: Front: 13 inches Rear: 13.4 inches
- Finger Gap: Front: 2 snug fingers & Rear: 2 1/2 fingers
- No fender work
- Alignment: UK Optimum
#3
My Setup and how a post should look
- Volk CE28N Genesis
Front: 7.5x17 ET50 with H&R 10mm DRS Spacers
Rear: 9.0x17 ET63
- OEM Bridgestone 215/45 & 245/40
- Buddy Club N+ Spec Coilovers
- Height: Fender - Center of the wheel: Front: 13 inches Rear: 13.4 inches
- Finger Gap: Front: 2 snug fingers & Rear: 2 1/2 fingers
- No fender work
- Alignment: UK Optimum
- Volk CE28N Genesis
Front: 7.5x17 ET50 with H&R 10mm DRS Spacers
Rear: 9.0x17 ET63
- OEM Bridgestone 215/45 & 245/40
- Buddy Club N+ Spec Coilovers
- Height: Fender - Center of the wheel: Front: 13 inches Rear: 13.4 inches
- Finger Gap: Front: 2 snug fingers & Rear: 2 1/2 fingers
- No fender work
- Alignment: UK Optimum
So, IMHO, your car is *gorgeous*.
#5
- Wheels
varrstoen ce28 reps 17x10 +22 (hoping to get some RS05RR this year)
- Tyres (brand, width etc.)
dunlop Z2 255/40
- Suspension (Springs, coilovers etc.)
BC BR coil Swift spring 12k
- Ride height measured from ground to fender or fender to center of the wheel
not sure maybe 2-2.5"
- And maybe how many fingers gap from fender to tire
uh none
- Fender work (rolled, pulled or flared)
no front lol, Js racing coming soon. Rear ASM style flare, cut quarter panel
- Alignment
approx -2 or -3 front, -3 or -4 rear, havent checken in awhile
So low I cant even run fenders, yo
varrstoen ce28 reps 17x10 +22 (hoping to get some RS05RR this year)
- Tyres (brand, width etc.)
dunlop Z2 255/40
- Suspension (Springs, coilovers etc.)
BC BR coil Swift spring 12k
- Ride height measured from ground to fender or fender to center of the wheel
not sure maybe 2-2.5"
- And maybe how many fingers gap from fender to tire
uh none
- Fender work (rolled, pulled or flared)
no front lol, Js racing coming soon. Rear ASM style flare, cut quarter panel
- Alignment
approx -2 or -3 front, -3 or -4 rear, havent checken in awhile
So low I cant even run fenders, yo
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0R
UK & Ireland S2000 Community
18
01-13-2015 03:14 PM
stolitonic22
S2000 Modifications and Parts
6
10-07-2008 08:24 AM