V6 Donut

Hey everyone, so I am kinda stumped on this..... I am preparing for the track next weekend and I am having some weird wear I have no experienced before.

I installed new Hawk HP+ pads on all four corners on the car. Now I am receiving weird wear on the left front corner. I have put about 100 miles on the pads so far. id also really like to not have to invest in a new set of pads at this moment. unless I have to.

any and all input is appreciated I really need to get this figured out asap


The picture shows I am receiving no wear or even any contact at all on the upper 50% of the rotor.

noodels

piston is on the skew and or slider pin problems or pads metal needs filing to fit callipers better.

V6 Donut

Piston on the skew?
Sliders are greased and slide as they should.

V6 Donut

I'll pull pads in a few and post a picture

Gottabfast

Bracket can be bent. Pull the rotor, look at the other side

V6 Donut

I fixed it. It's the dumbest thing ever. The pad was on the wrong side.