Coilover issue - help please!
#1
Thread Starter
Join Date: Dec 2013
Location: SW London
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Coilover issue - help please!
Hi guys, so I installed my BC BR type coilovers yesterday but I have a problem with ride height affecting preload...
So the issue is, everytime I loosen the bottom collar and turn the shock to wind into the hub it pulls the spring down with it creating slack in the spring. I am 100% turning the tube and the spring collars are locked together.
I cannot understand what I am doing wrong? I've had a couple of people try who use the same mono tube design on their cars and they can't I understand what's different and causing the issue on mine...
Any light on this is appreciated!
Lou
So the issue is, everytime I loosen the bottom collar and turn the shock to wind into the hub it pulls the spring down with it creating slack in the spring. I am 100% turning the tube and the spring collars are locked together.
I cannot understand what I am doing wrong? I've had a couple of people try who use the same mono tube design on their cars and they can't I understand what's different and causing the issue on mine...
Any light on this is appreciated!
Lou
Thread
Thread Starter
Forum
Replies
Last Post
TheClutchKicker
S2000 Brakes and Suspension
18
06-26-2012 05:59 AM
shehatezme
S2000 Brakes and Suspension
1
12-04-2010 04:09 PM