BC Racing BR Coilovers Review
11-02-2011, 07:37 PM
#43
Not sure if it's normal but I set both my futons to the same measurement and both my rears to a set measurement and the fender gap is different still. The front is like a 1/4 inch higher it seems on one side and around the same with the rear. How can I fix this or is it normal since I am not corner balanced? Also what's a good handling setting for the dampeners? It had a good bit of oversteer at the track with 1k front and 10k rear. Can't remember where I adjusted the knobs to right now. Also it seems there is a slot of excess suspension travel or I just don't have enough camber dialed in ( can post the numbers later) because at the track I knocked huge chunks out of my front fender liners and my fenders are rolled all the way around. I have 225 tires with 17x8 + 45 front wheels with 255 17x8.5 +48 rear. Soon to be rpf1's with 17x9 +45 all around.
11-16-2011, 03:26 PM
#44
Registered User
Join Date: Mar 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Is the rear spring length supposed to match the front (200mm)? The rears don't seem to go that low. I have mine pretty much as low as it can go, and it seems like it should be able to drop another 1" or so; I'm not trying to slam the car either. The fronts can go low no problem.
11-17-2011, 01:49 PM
#45
Yea the rears dont seem to go very low is you want to really lower the car. These arent meant for that I think. If you want to void the warranty you can always unbuild them and grind away the stop that keep you from going lower on the inside of the assembly.
02-25-2012, 01:56 AM
#47
Registered User
Join Date: Feb 2012
Location: Monterey Park CA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Excuse me guys, just want to make sure is this BC coilover come with Pillow ball top mount for the front. I don't see it from the picture that posted by toekneeg, please correct me if I am wrong.
03-01-2012, 06:07 AM
#48
Just received my order of BC Coilovers. Going to install them this weekend. Any tips with the install? Do you guys have an idea if I want an inch to 1 1/2 inch drop from stock how many clicks I need to do to lower it?
