meccjoo

It was shipped Fedex. Just a FYI an indirect signature is required in case you won't be home when it is out for delivery.

n!trox

hi,

another question: how thick was your tape? my tape has 1,5mm.
i ask myself if that is to much and if the spoiler will sit to high
with space between spoiler and trunk.

i would appreciate a fast answer, thanks

Super Nintendo Chalmers

There's no gap between the spoiler and trunk. There's a lip that goes around the bottom of the spoiler so as long as you put the tape on the inside of it it'll fill in that space. I believe that'll help with the water question that was posed earlier also.

n!trox

the reason for my question is:
the spoiler came with 3m tape which is 1,1mm thick.
because i`'m very careful, i have ordered a 3m pt1500
at a german online shop. This tape is 1,5mm thick.

when I have sticked the tape on the spoiler, it will be too late.

thats why im asking if 1,5mm is ok or too thick and how thick your tape was

Super Nintendo Chalmers

The tape that comes with the spoiler works just fine.

n!trox

anyone who bought another 3M tape?
i want to be safe.
i know someone who didnt make good experience with the tape that comes with.
thats why...

1nate7

There is enough tape to put along the entire perimeter of the lip, just inside the edge as mentioned. With proper prep and cleaning of the trunk surface, it will be a very strong bond. You would have a hard time ripping it off even if you wanted to. Make sure you get it lined up right the first time, because it's not going to move.

If you think the supplied tape is not sufficient, then you need to drill the holes in your trunk and bolt it down.

Super Nintendo Chalmers

Because they didn't prep it right.

hand banana

i messaged oem thing about a GPW spoiler a couple days ago and he hasnt gotten back to me, have any of you bought recently ?

n!trox

i think, clean the spoiler and trunk surfaces with isopropanol alcohol is enough prep or what should you do additional?