The quest for "Flushness" using AP2 OEM Wheels!
#511
[QUOTE=Glenn6one9,Feb 14 2010, 12:15 AM] Here's my contribution using Type-S wheels sorry phone pics
no spacer
with spacer
no spacer
with spacer
I use Project Kics 20mm Fr and 25mm Rr...straight bolt-on...
These wheels are NOT recessed, but have slight "dimples"...the 20mm BARELY clear...You cannot use 15mm, unless you want to shave/cut your stock studs, because they will protrude...
Hope this helps you AP2v3 owners
no spacer
with spacer
no spacer
with spacer
I use Project Kics 20mm Fr and 25mm Rr...straight bolt-on...
These wheels are NOT recessed, but have slight "dimples"...the 20mm BARELY clear...You cannot use 15mm, unless you want to shave/cut your stock studs, because they will protrude...
Hope this helps you AP2v3 owners
#512
Registered User
Stock 245s here with 20mm spacer in back (on a 1" drop). Rubbing pretty bad over big bumps. Seems like a 10mm spacer would be ideal, but with the stock AP2v2 wheels I would have to install extended studs as the stock studs would hit the wheel.
FWIW, 15mm on the front seems to be "ok", but I'm not leaving spacers on the front with nothing on the back.
Basically too much trouble for too little benefit. Back to stock for me.
FWIW, 15mm on the front seems to be "ok", but I'm not leaving spacers on the front with nothing on the back.
Basically too much trouble for too little benefit. Back to stock for me.
#516
Registered User
Join Date: Sep 2008
Location: Canoga Park/ Northridge CA
Posts: 2,419
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by S2KAKO,Nov 20 2010, 10:43 PM
20mm front with 225/40. 25mm rear with 255/40. -1.8F -3.2R
clean car!
#517
Registered User
Join Date: Feb 2008
Location: Planet Earth
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
#518
Registered User
Join Date: Aug 2008
Location: San Diego, California
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by S2KAKO,Nov 20 2010, 11:43 PM
20mm front with 225/40. 25mm rear with 255/40. -1.8F -3.2R
Read you got Kris' OEM HT now...can't wait to see her
#519
Registered User
Join Date: Apr 2009
Location: United S2000s of America
Posts: 1,158
Likes: 0
Received 4 Likes
on
3 Posts
Originally Posted by K.Shift,Nov 21 2010, 10:22 AM
oooooooo..shaved CR front bumper loooks cleeeeeean
clean car!
clean car!
[QUOTE]
Nabil, lookin' AWESOME!!!
#520
for those of you who know my car...will i rub if i get new stock sized tires?
im thinking no, but just want to make sure...
for those of you who dont know my car/specs here they are
25mm spacers all around
stock tire sizes
rolled all around, rear tab relocate etc.
lowered on coils, a little less than a finger all around
-2.67 camber in the rear, and i think -1.45 in the front.
im thinking no, but just want to make sure...
for those of you who dont know my car/specs here they are
25mm spacers all around
stock tire sizes
rolled all around, rear tab relocate etc.
lowered on coils, a little less than a finger all around
-2.67 camber in the rear, and i think -1.45 in the front.