djeddiebear

I just put on 15f/17r on stock suspension AP2v2. I have Swift Spec-R, but they're not being installed until this weekend. I haven't rolled touched the fenders at all. If you wait a week, I'll probalby have pics up for you and ready to tell you if it rubs or needs a fender roll.
[/quote]



so any update? did you lower the car yet? pics?
[/quote]

It's now lowered on Swift Spec R springs, stock shocks and 215f/245r tires. I added 15mm front and 17mm rear spacers. I took some really quick shots today during my quick lunch. I don't daily it, so I never see it during the day. I'm washing Sunday and can get a lot more pics. So far no rubbing!

P.S. Sorry for the dirty car, the front bumper is getting repainted soon, so I don't want to put the front lip on. I'm also having the hardtop fixed.

jaor.s2k

^^looking good!

WhyW

This looks sick! I would be afraid it would rub though- any issues? are those 255 in the rear?

Akkmednoseflem

Thanks! Only rubs on bad dips in the road. Even then, its a very minor rub. Just makes a small faint noise. Yes those are 255 in the rears. The fenders are rolled with the bumper tab relocated.

alSpeed2k

I just installed hubcentric 15mm Ichiba V2 spacers in the rear of my stock AP2. I'm riding on 255/40/17 Bridgestone RE11As and I also rub on bad dips in the road. I have no fender mods and have a stock alignment.

Mark355

^ Probably a bit aggressive for 255s. I run 245s with 15mm rears and have no rubbing @ -2 camber. Stock fenders.

alSpeed2k

WhyW

Reeeally. Yours looks more aggressive than 15mm! That makes me rethink what I'm going to go with, I was thinking 20mm with 255 in the rear but I think that will be too aggressive! I'll have to ponder this one a bit more.

El S2000

I ran 17mm Rear with 255s and a bit over -2 camber and I just barely rubbed on high speed bumps with untouched rear quarters. Hope that helps some!

WhyW

Do you think you wouldn't have issues if you rolled your fenders? Thanks for the tip!