The quest for "Flushness" using AP2 OEM Wheels!
#1002
Originally Posted by El S2000' timestamp='1349452900' post='22061394
^^ I am running 15mm front and 17mm rears and about a 1 finger gap all around 225/255s and the rear definitely rubs on highway bumps. The front used to rub on highway bumps specifically on the inner liner plugs that hold the fender liner in. I just removed the plugs they were hitting and it doesn't rub now. I'm trying to avoid rolling the rears as rolling the quarter panels is irreversible. If you are ok with rolling anyways you might as well do it for peace of mind.
I have pics of mine a few pages back if you want an example. Once you bolt them on you're not gunna want to remove them.
Edit: I'm on my phone but here's what it looks like
I have pics of mine a few pages back if you want an example. Once you bolt them on you're not gunna want to remove them.
Edit: I'm on my phone but here's what it looks like
#1003
^^ hey those are hankook v12s. And if you we're rolled all around you can clear it super easy. The backs barely hit when they do rub without a roll so you should be good if you roll. I do think star specs run wider for some reason though so it might be a bit closer.
#1004
Registered User
Join Date: Jan 2012
Location: Vineland Nj
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Hey everyone!
i have +15 front and +25 rear. I believe my fenders are rolled and flared/pulled (judging by putting my car next to a stock s) i have Michelin Pilot Sports 245/40 in the rear and 215/45 in the front. Im looking to either get +25 spacers for the front or to find 2 ap2v1 rears. What would you all suggest?
Pictures Below!
i have +15 front and +25 rear. I believe my fenders are rolled and flared/pulled (judging by putting my car next to a stock s) i have Michelin Pilot Sports 245/40 in the rear and 215/45 in the front. Im looking to either get +25 spacers for the front or to find 2 ap2v1 rears. What would you all suggest?
Pictures Below!
#1007
#1008
Originally Posted by chrisaltima' timestamp='1350061236' post='22078064
Does anyone know if the 5mm H&R Spacers ( rear only ) come with extended studs...if they do, is a wheel bearing change required upon changing to the longer studs ??
Thanks.
Thanks.