Official Flush/hella flush(STANCE FTW) S2 THREAD
03-27-2012 | 01:22 PM
#7671
Registered User
Joined: Sep 2009
Posts: 791
Likes: 0
From: Dallas, Texas
.. what a huge difference lolwill my factory camber get low enough?
[/quote]
Yes it will work =)
03-27-2012 | 10:46 PM
#7673
Joined: Jul 2004
Posts: 2,269
Likes: 1
From: Canada
Originally Posted by tsukubaSpec' timestamp='1332877358' post='21549220
18x11+35 with a 235/35/18 and -5 degree of camber should fit !
thanks guys, was pretty sure i wasnt out to lunch on this.
danio..... i actually checked mine against yours aswell when i was desiding on a size!
for tires i went with 245-35 in the rear and 225-40 in the front.
I cant be as slammed as some of you guys but will makesure its dirty low!
My new set up is going to be very similar to yours.
03-28-2012 | 06:29 AM
#7674
Registered User
Joined: Oct 2011
Posts: 123
Likes: 0
Originally Posted by HDZ' timestamp='1332878203' post='21549271
[quote name='tsukubaSpec' timestamp='1332877358' post='21549220']
18x11+35 with a 235/35/18 and -5 degree of camber should fit !
18x11+35 with a 235/35/18 and -5 degree of camber should fit !
thanks guys, was pretty sure i wasnt out to lunch on this.
danio..... i actually checked mine against yours aswell when i was desiding on a size!
for tires i went with 245-35 in the rear and 225-40 in the front.
I cant be as slammed as some of you guys but will makesure its dirty low!
My new set up is going to be very similar to yours.
[/quote]
my fenders are all factory at the moment, but were gonna roll and pull in the next few days.
unfortunately i cant get AS slammed as most guys here so i may not run into rubbing issues, if i do tho...i will be moving down a tire size!!
03-28-2012 | 09:36 AM
#7677
Registered User
Joined: Mar 2011
Posts: 6
Likes: 0
03-28-2012 | 12:24 PM
#7678
Registered User
Joined: Oct 2011
Posts: 123
Likes: 0
i knowww i seen this after i already ordered tires. if i have fitment problems upfront this was my next tire choice.
another guy locally did the 35 series but said it was too thin and the car needed to be dumped that extra inch more
03-28-2012 | 03:57 PM
#7680
Registered User
Joined: Oct 2011
Posts: 123
Likes: 0
well.. the shop in winnipeg canada i went to said theys NO WAY a 245-35 will fit on an 11... they gave up. i think they suck. cause i have seen others with this online.
got the 10's on and he was bitching that was hard to get a 225-40 on a 10"...... i think they fail at life. next shop tomorrow... as for now.. test fit NO camber upfront i need roll and pull a bit before i can slam n finish the fitment. MEXI flush for now boys!!!! woot wooot
