Official Flush/hella flush(STANCE FTW) S2 THREAD
#2893
I will say that a 225 on a 10j is wandering into the "sketch" territory, but it's still workable. If you have any option of changing it at this point, you might think about going with a 235 instead.
#2895
Registered User
Join Date: Aug 2006
Location: Costa Mesa
Posts: 1,596
Likes: 0
Received 0 Likes
on
0 Posts
Sup Dinh!
I picked these up about two weeks ago. Really really happy with the fitment.
255/40 Nitto Nt05 Rear
235/40 Toyo R1R up front
Zero rubbing with minimal camber. Didn't even have to pull the rear quarters at all. Just rolled flat and tab relocated. Bumper required some additional shaving, but AP2 bumper would definitely fit these better as it is wider. Fronts have about -2.5 camber and lots of pulling. Still rubbing up front when entering driveways due to suspension compression. No fender damage as a result, just a squeak when the tire contacts the fender. Not a problem at all. If I wasn't so low, there wouldn't be any rubbing at all and I could run 255 Nt05 all around with -3 camber.
For the record:
17x10 +38 is the absolute best fitment RPF1 for the s2k fitment guys. Track guys can even run this setup with non stagger 255s with aggresive track alignment.
I picked these up about two weeks ago. Really really happy with the fitment.
255/40 Nitto Nt05 Rear
235/40 Toyo R1R up front
Zero rubbing with minimal camber. Didn't even have to pull the rear quarters at all. Just rolled flat and tab relocated. Bumper required some additional shaving, but AP2 bumper would definitely fit these better as it is wider. Fronts have about -2.5 camber and lots of pulling. Still rubbing up front when entering driveways due to suspension compression. No fender damage as a result, just a squeak when the tire contacts the fender. Not a problem at all. If I wasn't so low, there wouldn't be any rubbing at all and I could run 255 Nt05 all around with -3 camber.
For the record:
17x10 +38 is the absolute best fitment RPF1 for the s2k fitment guys. Track guys can even run this setup with non stagger 255s with aggresive track alignment.
#2896
Really I wasn't even sure I have it on there now it seems to work just fine I had my rear fenders rolled and the fender lining cut in the front the guy didn't bang the tabs up so I think I'm gonna have to do that and Im planning on going a little lower i have a feeling Im gonna need to do the bumper tab relocation which Im not so sure exactly how to begin with that and cutting the piece of the fender all that I want to be done to ensure i wont rub
#2897
Registered User
Join Date: Aug 2008
Location: Central MA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Really I wasn't even sure I have it on there now it seems to work just fine I had my rear fenders rolled and the fender lining cut in the front the guy didn't bang the tabs up so I think I'm gonna have to do that and Im planning on going a little lower i have a feeling Im gonna need to do the bumper tab relocation which Im not so sure exactly how to begin with that and cutting the piece of the fender all that I want to be done to ensure i wont rub
#2898
Yea I'm loving that idea lol let you know how it goes and srry pictures soon just wanna get it right before I post them
#2899
I think I'd probably proactively fix that part. You run the risk of cutting the tire, which if it's an old tire then w/e, but if it's new then you're cutting into perfectly good tires.
#2900
Registered User
Join Date: Aug 2008
Location: Central MA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
i was kidding, but the first time around i had not relocated everything yet and took it for a spin and it happened. I have since re done the fenders and rear bumper and did it properly the second time.