kennychiwa

Okay pros, I feel like I know most of what can and cannot fit on a s2000, but I need help with this one. I'm looking at two sets of wheels

First, I would like to say I don't want TOO much stretch, and all my fenders are rolled/bumper tab relocated.

17x8+22 fronts, 17x9+36 rears. - I know I can fit the rears pretty easily, but as far as fronts go I'm not sure how far I can go (trying to avoid pulling)

second set of wheels are
17x8.5+31 fronts, 17x9.5+35 rears.

I was thinking standard 215/245 set up on both wheels. Which is more aggressive in the front, the 8+22 or the 8.5+31?

Any insight on these two set ups would be greatly appreciated guys!

__Ap2__s2k

You can fit a 225/40 up front easily with both those wheels you mentioned on the front. And that isn't much of a stretch imo

kennychiwa

Thanks for the help! Ok so now I know I can fit a 17x8+22 and 17x8.5+31, would these be poking too much in the front if mine are just rolled? I kind of want to tuck the front tire.

Also for the rears, is a 245 series tire on a 17x9.5+35 or 17x9.5+32 possible? Will 3mm make that much big of a difference?

matt.the.lee

anyone here running Stance GR+ Pros for coilovers?
I'm having issues with ride height
1 finger wheel gap and the rears are maxed

__Ap2__s2k

You'll be able to tuck tire in the front easily. You may careful rub at full lock. As for the rears it will take a lot of negative camber to fit a 245 on either of those wheels you mentioned. You will have a lot of poke. 235 would work and would require at least -3 of camber. But that won't affect tires much if your toe is aligned properly. I'd go 225 front 235 rear

kennychiwa

I see, thanks for the insight!

chris2k03

I had the same issue. Ended up having to get shorter springs for the coils.

matt.the.lee

Thought so. I'm talking to a sales rep from Stance right now.
How much lower were you able to go?
I'm assuming you went with swift springs?

Hkboi5o4

Most recent picture from Import face off

s2kep3

Couple of pics from a car meet