Official "Official" Forum All your "Official" threads!

Official Flush/hella flush(STANCE FTW) S2 THREAD

Thread Tools
 
Old 01-07-2014, 09:35 AM
  #10801  
Registered User
 
__Ap2__s2k's Avatar
 
Join Date: Apr 2013
Posts: 693
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by migueloskii
has anyone done 18x10.5 +20 upfront with stock fender? they have been pull already so is the back, trying run a square set up I will probably add spacers on back. will be using 225/40 series tires to help out and obviously camber. im worried about the front hitting inside or being to aggressive. thanks for any input. also what would be better for adding camber upfront spc or buddy clubs?

That will never happen without a RETARDED amount of negative camber. And I wouldn't run a 225 on a 10.5. Too much of a stretch.
Old 01-07-2014, 09:37 AM
  #10802  
Registered User
 
__Ap2__s2k's Avatar
 
Join Date: Apr 2013
Posts: 693
Likes: 0
Received 0 Likes on 0 Posts
Default

To put it in perspective. I run an 18x9.5+40 on a 225/40 up front and rub pretty hard at near full lock. Stock fenders no pull. Assuming you have a 10mm pull or so I don't think that's nearly enough to stuff a 10.5+20. No way.
Old 01-07-2014, 10:18 AM
  #10803  
Registered User

 
migueloskii's Avatar
 
Join Date: Oct 2013
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

ithink i can do it since im running 18x9.5 +20 on 215/40 with just -1 camber, i rub when turning but thats because im tucking almost half the tire but iknow a full inch in wheels is a big difference
Old 01-07-2014, 11:16 AM
  #10804  
Registered User
 
__Ap2__s2k's Avatar
 
Join Date: Apr 2013
Posts: 693
Likes: 0
Received 0 Likes on 0 Posts
Default

An inch wider will make a huge difference. I highly recommended running at least a 235, but like I said, gonna be tough to fit that. Good luck
Old 01-07-2014, 11:17 AM
  #10805  
Registered User
 
__Ap2__s2k's Avatar
 
Join Date: Apr 2013
Posts: 693
Likes: 0
Received 0 Likes on 0 Posts
Default

How do you have only -1 degrees of camber... If you're slammed and on x9.5+20.... Doesn't make sense
Old 01-07-2014, 11:17 AM
  #10806  
Registered User
 
__Ap2__s2k's Avatar
 
Join Date: Apr 2013
Posts: 693
Likes: 0
Received 0 Likes on 0 Posts
Default

Pics?
Old 01-07-2014, 01:18 PM
  #10807  
Registered User

 
migueloskii's Avatar
 
Join Date: Oct 2013
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

this is how it sits its negative -1 something and rear was 3.5 when i align but probably close to -4 now
[attachment=51755:IMG_0088.jpg]
[attachment=51756:IMG_0087.jpg]
cars its at the shop as we speak
[attachment=51757:IMG_0082.JPG]
Attached Thumbnails Official Flush/hella flush(STANCE FTW) S2 THREAD-img_0088.jpg   Official Flush/hella flush(STANCE FTW) S2 THREAD-img_0087.jpg   Official Flush/hella flush(STANCE FTW) S2 THREAD-img_0082.jpg  
Old 01-07-2014, 01:30 PM
  #10808  

 
juntsky's Avatar
 
Join Date: Sep 2012
Posts: 2,587
Likes: 0
Received 2 Likes on 2 Posts
Default

Also not sure how you're at -1 with a 9.5+20? I run 9.5+40, my fenders are flat, 225/40 and I'm at -3 camber. You must rub everywhere
Old 01-07-2014, 02:21 PM
  #10809  
Registered User

 
migueloskii's Avatar
 
Join Date: Oct 2013
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Full turn and when driving to an incline driveway its a pain but im not worried about rubbing, ijust dont go into those driveways with wheels on full turn, try to have them almost straight so idont do too much damage to fenders. Iwould summit a picture of the alignment but idont have it
Old 01-07-2014, 02:33 PM
  #10810  

 
juntsky's Avatar
 
Join Date: Sep 2012
Posts: 2,587
Likes: 0
Received 2 Likes on 2 Posts
Default

seeing that youre already poking probably an inch, i really dont see how youre going to run a 10.5. but youre welcome to try it out. I'd be curious to see it.


Quick Reply: Official Flush/hella flush(STANCE FTW) S2 THREAD



All times are GMT -8. The time now is 09:15 PM.