Official Flush/hella flush(STANCE FTW) S2 THREAD
has anyone done 18x10.5 +20 upfront with stock fender? they have been pull already so is the back, trying run a square set up I will probably add spacers on back. will be using 225/40 series tires to help out and obviously camber. im worried about the front hitting inside or being to aggressive. thanks for any input. also what would be better for adding camber upfront spc or buddy clubs?
That will never happen without a RETARDED amount of negative camber. And I wouldn't run a 225 on a 10.5. Too much of a stretch.
To put it in perspective. I run an 18x9.5+40 on a 225/40 up front and rub pretty hard at near full lock. Stock fenders no pull. Assuming you have a 10mm pull or so I don't think that's nearly enough to stuff a 10.5+20. No way.
ithink i can do it since im running 18x9.5 +20 on 215/40 with just -1 camber, i rub when turning but thats because im tucking almost half the tire but iknow a full inch in wheels is a big difference
this is how it sits its negative -1 something and rear was 3.5 when i align but probably close to -4 now
[attachment=51755:IMG_0088.jpg]
[attachment=51756:IMG_0087.jpg]
cars its at the shop as we speak
[attachment=51757:IMG_0082.JPG]
[attachment=51755:IMG_0088.jpg]
[attachment=51756:IMG_0087.jpg]
cars its at the shop as we speak
[attachment=51757:IMG_0082.JPG]
Full turn and when driving to an incline driveway its a pain but im not worried about rubbing, ijust dont go into those driveways with wheels on full turn, try to have them almost straight so idont do too much damage to fenders. Iwould summit a picture of the alignment but idont have it