Official Flush/hella flush(STANCE FTW) S2 THREAD
10-28-2013, 06:07 AM
Registered User
Join Date: May 2011
Location: Milford, MA
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
What's up everyone? Need a little help. I'm more of a beefy tire track height type of guy but since I'm in the market for new suspension and my current set up is ready to be swapped for something new, I want to go low for the time being and try something out of my comfort range.
I'm currently running 17x8/9 +30 and don't know what the "ideal" tire set up for 17's and my specs for going low. Camber settings as well.
My tire set up right now is 225/45/17 & 255/40/17 and about 1' finger gap.
I'm currently running 17x8/9 +30 and don't know what the "ideal" tire set up for 17's and my specs for going low. Camber settings as well.
My tire set up right now is 225/45/17 & 255/40/17 and about 1' finger gap.
I'm running a 17x9 +38 in the rear with a 255/40 at ~3* negative camber on BC coilovers as low as they can go, tucking just a tiny bit of tire. Up front I have a 17x8 +35 with a 225/45 but I forget the camber setting. You're offset isn't too much more, only 8mm (0.3") at most so you can get away with camber tweaking I'm sure.
My fenders have been rolled flat and tabs relocated. I might pull them just a little as well with a 255, I don't mind the fender work as much as I mind swapping tires around because of wear.
10-28-2013, 02:39 PM
Registered User
Can I play? Not much stretch here though 
17x9+25 in the rear.
http://www.flickr.com/photos/65425337@N07/10151046514/http://www.flickr.com/photos/65425337@N07/10151046514/ by http://www.flickr.com/people/65425337@N07/, on Flickr
17x9+25 in the rear.
http://www.flickr.com/photos/65425337@N07/10151046514/http://www.flickr.com/photos/65425337@N07/10151046514/ by http://www.flickr.com/people/65425337@N07/, on Flickr
10-28-2013, 08:50 PM
Registered User
10-28-2013, 09:48 PM
Registered User
It's the FD RX7 diffuser from Shine. Bolted right up and fit perfectly. I had to make custom brackets and cut a small portion to clear the exhaust Y pipe.
10-29-2013, 05:05 AM
Registered User
Join Date: Dec 2012
Location: RVA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Would I be able to fit something around a 18x10 +35ish non staggered setup with 245 + tires? I have 20mm wider front fenders and 25mm rear overfenders. I'd prefer not to run over -4 camber in the rear and the least amount in the front. If not what would you recommend?
10-29-2013, 11:06 AM
Registered User
Join Date: Sep 2010
Location: so cal
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
their running x10+45 on 255 on stock body and in my opinion it sits perfect.
so in youll be safe by an extra 10mm front and 15mm rear