Official Flush/hella flush(STANCE FTW) S2 THREAD
03-04-2013, 04:28 PM
Registered User
Join Date: Dec 2010
Location: Dalton, GA
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Quick fitment question: i have 18x10.5 +38 with a 245 tire and fenders rolled and pulled slightly with -3.5 camber. However I am Still rubbing just slightly and i would like to go lower still, do you recommend more fender pull or smaller tire? and if smaller tire, what size?
03-04-2013, 05:02 PM
Registered User
Join Date: Mar 2012
Location: Marble Falls, Tx
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Quick fitment question: i have 18x10.5 +38 with a 245 tire and fenders rolled and pulled slightly with -3.5 camber. However I am Still rubbing just slightly and i would like to go lower still, do you recommend more fender pull or smaller tire? and if smaller tire, what size?
If your fenders are still in good shape, I'd probably try to keep them that way (unless you don't mind the body work)
Also, are they 35/40 series?
on a 10.5, 345/35 is about perfect, but 40, you could go smaller on the size of the tire.
ALSO, keep in mind more low = more camber = easier to fit (all depending on how much lower you want to go)
03-04-2013, 09:19 PM
Originally Posted by pocky' timestamp='1362219279' post='22374901
What's the specs on your CE's? Looks great!
18x9.5 +44 235/40 all around
(Rears are 225/40 but federal 595's, they run fat as hell, more like a 240-245/40, and don't stretch as well)
03-05-2013, 07:35 AM
Registered User
Join Date: Dec 2010
Location: Dalton, GA
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by la_fever323' timestamp='1362446902' post='22380331
Quick fitment question: i have 18x10.5 +38 with a 245 tire and fenders rolled and pulled slightly with -3.5 camber. However I am Still rubbing just slightly and i would like to go lower still, do you recommend more fender pull or smaller tire? and if smaller tire, what size?
If your fenders are still in good shape, I'd probably try to keep them that way (unless you don't mind the body work)
Also, are they 35/40 series?
on a 10.5, 345/35 is about perfect, but 40, you could go smaller on the size of the tire.
ALSO, keep in mind more low = more camber = easier to fit (all depending on how much lower you want to go)
full tire size currently is 245/40r18
so a 240/35 should be good?
yeah ive always heard that, but it gets expensive going to get an alignment and camber adjusted
03-05-2013, 07:17 PM
i need help figuring out what size tires to run on my wheels. they're algernon intelesse 18x9 -2 and 18x10 +1 not sure how much camber to run but i have them mounted on the car in the picture to take a look at it.
03-05-2013, 08:16 PM
I'm not sure I believe those offsets. Those look near identical to the fitment I had with my 18x9et25 and 18x10et30 with rolled and pulled fenders. Either way if previous setups were any indication, you'll probably need -8-10* camber
