OddjobS2K

Hey Everyone,

Here's my dilemma, I thinking about purchasing a set of RPF1 17x9 45 up front and 17x9.5 38 in the rear. And running 235/40/17s up front and possibly 255/40/17s (not set in stone) in the rear. I'm currently running stock AP2 rims with 215/45/17 up front and 245/40/17 in the rear with 20mm spacers up front and 25mm spacers in the rear. I'm on Bilstein PSS9 and have a little less than one finger gap with rolled fenders, rear tabs relocated and slightly trimmed fender liners.

My question is if I run the RPF1 setup I'm thinking about, will it look similar to my current set up with spacers? I really don't want the rear tires any wider then they already are.

Any insight you guys can provide is very much appreciated.

Thanks in advance.

1nate7

Wheels will poke out additional 15mm compared to your current stock wheel setup with spacers.

Willtheyfit.com

ArmyAliBaba

17x9--45s all round, 245/255


DSC09401 by armyalibaba, on Flickr

DSC09411 by armyalibaba, on Flickr

DSC09397 by armyalibaba, on Flickr

R00567

beautiful :-D keep it up bro :-D

fredrickm

This is a bit of a newb question that has probably been answered before but does running staggered tires on a square wheel setup (245/255 or 225/255 on 17x9s all around for example) have the same effect as staggering both tires and wheels?

Edit: Nevermind, figured it out by reading through the whole thing lol

Danwolski

A few of my faves taken this summer
Attachment 185596
Attachment 185597
Attachment 185598

daher2323

Akkmednoseflem

Untitled by Akkmed, on Flickr

LightKiosk

Mobile pics inc.





Last picture was taken after washing/waxing the car.

the Madspeed

9172014S2000fW by the MADSPEED, on Flickr

9172014S2000gW by the MADSPEED, on Flickr

9172014S2000eW by the MADSPEED, on Flickr