Official Enkei RPF1 Thread PT 2.
#2081
Registered User
@ Mooseman, i am running 225 / 40 / 17 up front, but there is allot of room left.... next i will put in some 235 / 40 up front.
i only rolled the fenders no pull, with that i run -1,5 camber up front... so with the 235 / 40 tire you should be fine
here is picture of my car:
i only rolled the fenders no pull, with that i run -1,5 camber up front... so with the 235 / 40 tire you should be fine
here is picture of my car:
#2082
Registered User
Getting a set of 17x9 +45 nonstaggered. Going to get all fenders rolled and rears tab relocated. Been through over 50 pages and still didn't really get my question answered because not everyone posted up their specs. For my rears, I'm probably going to be fine with 255/40 with about an inch gap an -3 camber with minimal to no rubbing hopefully. My question is what tire size should I get for the front? I don't want to flare, pull my fenders, or have any poke. I'm hoping to only having to have -2 to -3 chamber so I'm pretty much in between 225/45,235/40, or 245/40.
#2083
without rolling the fenders on the s2k you really are limited. if you find someone who knows what they are doing rolling fenders isnt bad. it only costs around 25 a fender. I have rolled fenders and am running 17x9 +45 with 245's all around. Pretty agressive for not being rolled and I am lowered about 2 inches.
#2084
Originally Posted by blobianco' timestamp='1332997651' post='21554733
without rolling the fenders on the s2k you really are limited. if you find someone who knows what they are doing rolling fenders isnt bad. it only costs around 25 a fender. I have rolled fenders and am running 17x9 +45 with 245's all around. Pretty agressive for not being rolled and I am lowered about 2 inches.
#2086
Getting a set of 17x9 +45 nonstaggered. Going to get all fenders rolled and rears tab relocated. Been through over 50 pages and still didn't really get my question answered because not everyone posted up their specs. For my rears, I'm probably going to be fine with 255/40 with about an inch gap an -3 camber with minimal to no rubbing hopefully. My question is what tire size should I get for the front? I don't want to flare, pull my fenders, or have any poke. I'm hoping to only having to have -2 to -3 chamber so I'm pretty much in between 225/45,235/40, or 245/40.