NFR_AP2

when i had my CE28's

http://www.flickr.com/photos/usdmej6/6557377703/

s2kslav

damn man, makes me want to order a set tonight!

chrisaltima

^^^^I said the same exact thing...makes me want to get the same exact specs and everything. I think my son up top runs a 245 in the rear. I would probably try and run a 255 on the +35...9.5 of course.

s2kslav

yeah thats what i was gonna do, with a 245 in the front. just not sure if i want to do 9.5 +35 all around or 10 +45

s2sik

^ do the 10, you can fit a BBK if you ever go that route and its also a slightly easier fit.

NFR_AP2

you cant fit a spoon caliper on a 17x10 +45 can you?! i would think not

s2sik

i am fairly sure you can. i have owned the 9.5 +47 and the 9.5 +35 and test fitted the 10 + 45 but didnt have the actual calipers, only the template. i cant say with 100% certainty anymore since its been awhile, but about a year ago i went through all the research to see if they would fit since i was planning to change the specs again and bbk fitment was one of the parameters.

majorwhiplash

you need a 5mm spacer if you plan to run monoblocks on the s2000. the bottom part of the spoke will hit the calipers. when i have time, i will take a pic. the hub part of a 10 inch wheel is alot thinner than a 9.5 or 9 wheel with 22 or 35 offset.

s2sik

^nice, post up when you get a chance. i will also try to find mine, granted its only with a template. the +47 cleared easily, the +35 needed about a 5mm spacer. the 10 +45 seemed like it would have cleared, but if you have the actual wheels and calipers that would be great help

dt07si

17x10 +50's (which are a custom order) are designed with BBK figment in mind. 17x10+45's require a spacer.

http://blog.gotuning.com/2010/04/27/...e-of-the-game/