Offical VOLK Racing Wheel Thread!
#3952
#3953
It won't come off even if you get brake cleaner on the hubs if you ever have to do brakes. Its permanent asf. And hubs don't see enough UV exposure to make that a big concern (standard issue POR isnt UV stable).
More involved solution?
I couldn't seem to find Volk flat caps for my ZE's.
So I used a bore gauge to measure the bore on my wheels. I ordered caps for that bore size on eBay...from China. For $20. Shipped. They arrived in like...a week.
Lucky for me, they came in bronze. They come in a lot of other finishes too.
I used a rubber O-ring to make them fit nice and snug, and without rattle.
The bronze is really effing close to the wheel finish. Like maybe...a half shade off. But when I'm installing a part, I make more observational notes than the FBI. In the real world, in real lighting, its virtually identical.
I was gonna 3D print them, but finding bronze paint or wrap was impossible.
I tried wrapping in matte black, but it ended up looking kinda dumb (in my eyes).
If you have a more simple color of wheel, you can easily wrap the caps.
Last edited by B serious; 07-19-2022 at 10:24 AM.
The following users liked this post:
B serious (07-19-2022)
#3956
Here ya go
https://www.ebay.com/itm/39399078057...mis&media=COPY
most Volks were designed for an O ring type cap. So the "bridge" on whe wheel's hub center is pretty thin - not much for a snap-in cap to hold onto.
So u may need to buy O rings like I did.
The following users liked this post:
Nfsryder (07-19-2022)
The following 2 users liked this post by 16gkid:
Bri (07-20-2022),
maranelloboy05 (07-20-2022)