dope thread

 

[attachment=67104:image.jpg]

 

Here's a couple of mine after installing JDP rear diffuser, oem side strakes, and oem front lip. nt03+m +40 offset 18x9.5 245/40/18 all around. Suspension is d2 adjustables, gotta get her cambered adjusted eventually.

 

I've been looking to get a set of these for my NFR S and I can't decide if I want to leave the wheels silver or have them painted/coated gold.
I couldn't find any NFRs with gold NT03s so I photoshopped a few cars I found on google. Hope this helps anyone else looking at the same combination as me.
2 were given light gold paint look, and the other 2 were given a gun metal gold looking color.

Light Gold 1


Light Gold 2


Gun Metal Gold 1


Gun Metal Gold 2

 

any more people with +27 SBC's since now you can buy them on ebay even.. really wanna see more photos of them before buying.. :/ i had RPF1's in SBC and loved them

 

has anyone on here had the nt03's in the 17's and the 18's? what are your thoughts on both set ups?

i want to go with the 17's but the concave 18's look so much better

anyone here selling their nt03's?

 

anyone know where i can buy NTO3's been searching haven't found any vendors, looking for 18x9.5 et 40 set up..

Thank You

 

How can u fit 18x9.5+40 in front w -2.5 camber, Fenders and liners already trimmed? Im on a one inch drop w swifts as well. I currently have 17×8+47 w 225 tires but scared to jump into these wheels which are much more aggressive. My rears will be fine just fronts concern me especially since I drive my s2k everywhere and don't want to destroy my fenders over a bump.

 

You have to definitely roll your fenders and give it a slight pull. I have the same specs with -2 camber in the front with 255/35 tires. 1 finger gap in the front and I can drive it hard without worrying. You can get a 245 tire if you want a little more clearance.

 

I plan on using 245/35/17 tires all around so im hoping I wont have to pull the front. My fronts are already trimmed and so are the fender liners to fit the wheels I have now.. I don't know of anyone locally that can pull my fenders if necessary so want to avoid it