Off-topic Talk Where overpaid, underworked S2000 owners waste the worst part of their days before the drive home. This forum is for general chit chat and discussions not covered by the other off-topic forums.

Honda develops V-6 which cruises on 3 cylinders

Thread Tools
 
Old 07-10-2003 | 01:28 AM
  #1  
shockwave667's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 2,551
Likes: 0
From: Scottsdale
Default Honda develops V-6 which cruises on 3 cylinders

Pretty interesting engine Honda just developed. Would be interesting to see what car they use it in first assuming it comes to the US.

05:25:21 July 10, 2003)
Honda develops V-6 which cruises on 3 cylinders


By YUZO YAMAGUCHI | Automotive News

TOKYO - Honda Motor Co. has developed a 3.0-liter V-6 engine that can deliver as much as 250 hp when accelerating, or cut back to just three cylinders when cruising.

That flexible performance offers an average fuel economy equivalent to that of a 2.4-liter four-cylinder engine, or 27.3 mpg, under Japan's so-called 10-15 mileage test, which is not directly comparable with fuel-economy tests in other countries.

The new powertrain, using what Honda calls "variable cylinder management," is mounted in the remodeled Inspire sedan, which was introduced June 19 in Japan. Spokesman Masaya Nagai says Honda has no immediate plans to use the technology on models in the United States.

The previous Inspire was the Japan-market version of the U.S.-market Acura TL. The TL is to be remodeled this autumn for the U.S. market. Nagai declined to give a specific reason for not using the new engine in the Acura TL, saying the company was not prepared to disclose details.

In addition to its low fuel consumption, the engine also reduces exhaust emissions, helping the Inspire meet Japan's ultralow emissions and 2012 fuel consumption standards.

To cut emissions, the engine locates high-density catalytic converters directly below each cylinder head for improved gasoline exhaust at low engine temperatures.

The engine also cuts vibration and noise. When operating in three-cylinder mode, engine vibration is reduced by extrapolating vibration from the change in crankshaft rotation speed and sending the information to an active control engine mount, which compresses and extends an actuator in a same-phase, same-period motion to dampen the engine mount.

Similarly, a speaker creates an opposite phase sound or "active noise control," for a canceling effect, thereby leaving the driver unaware of changes in the number of cylinders being used.

http://www.autoweek.com/cat_content.mv?por...t_code=07353465
Old 07-10-2003 | 04:23 AM
  #2  
WestSideBilly's Avatar
 
Joined: May 2001
Posts: 93,287
Likes: 805
From: Nowhere
Default

GM has been doing this for a couple years. The last two paragraphs, about the active engine mounts and "active noise control" are interesting, though.
Old 07-10-2003 | 04:50 AM
  #3  
PeaceLove&S2K's Avatar
Registered User
 
Joined: Jul 2002
Posts: 19,255
Likes: 18
From: San Diego, CA
Default

Yup, GM calls it "Displacement on Demand" (which is a pretty cool name, IMHO).
Old 07-10-2003 | 05:04 AM
  #4  
DarioManfretti's Avatar
Registered User
 
Joined: Jul 2001
Posts: 3,277
Likes: 0
From: Lyndhurst
Default

I remember when Cadillac did this quite a few years ago. I think it was something like 4-6-8. It didn't really do that well in the sales dept. though. don't know how relialbel it was either.
Old 07-10-2003 | 06:21 AM
  #5  
Sr2oD3's Avatar
Registered User
 
Joined: Jul 2003
Posts: 4,435
Likes: 0
From: Andromeda
Default

Mercedes-Benz put that technology in the Maybach so it'll run on like 6 or 8 when not needing the gurth power of the 12, I think it's really cool and increase the gas milage (in the city, mostly) tremendously.
Old 07-10-2003 | 07:04 AM
  #6  
RiceBurnerTX's Avatar
Registered User
 
Joined: Dec 2002
Posts: 1,505
Likes: 0
From: Austin
Default

Yup, my bosses expedition has that. His V8 can limp around on 4 cylinders, pretty cool I guess.
Old 07-10-2003 | 07:11 AM
  #7  
fltsfshr's Avatar
Gold Member (Premium)
 
Joined: Jan 2003
Posts: 10,868
Likes: 1,058
Default

yes cadillac had 4 6 8 back in the 80's if I recall it was a total nightmare and drove the resale of the those models right into the ground.
Old 07-10-2003 | 08:17 AM
  #8  
Palmateer's Avatar
Registered User
 
Joined: Oct 2000
Posts: 3,086
Likes: 0
From: St. Pete, Florida
Default

What we need (for more torque) is for Honda to develop an S2000 four-cylinder engine that accelerates on eight cylinders
Old 07-10-2003 | 08:23 AM
  #9  
silverpdxs2k's Avatar
Registered User
 
Joined: Feb 2002
Posts: 332
Likes: 0
From: Portland
Default

[QUOTE]Originally posted by RiceBurnerTX
[B]Yup, my bosses expedition has that.
Old 07-10-2003 | 05:42 PM
  #10  
moparacker's Avatar
Registered User
 
Joined: May 2003
Posts: 3,401
Likes: 0
From: Va Beach, VA
Default

Originally posted by silverpdxs2k


Are you sure? They only come in the 5.4 & 4.6 V8's around here, and don't do that.
No, he isn't sure. His boss is full of it, big time.


Quick Reply: Honda develops V-6 which cruises on 3 cylinders



All times are GMT -8. The time now is 05:24 AM.