WTB Enkei RPF1 wheels
#4
u basically have 3 different set combos out there...
a) 17x8 +45 front 17x9 +45 rear
b) 17x9 +45 all around
c) 17x8 +35 front 17x9.5 +38 rear
colors vary from F1 silver, gold, and sbc finishes...and i have seen some matte black sets, not sure if that finish is offered by enkei.
a) 17x8 +45 front 17x9 +45 rear
b) 17x9 +45 all around
c) 17x8 +35 front 17x9.5 +38 rear
colors vary from F1 silver, gold, and sbc finishes...and i have seen some matte black sets, not sure if that finish is offered by enkei.
#5
and to answer the next FAQ about wheels....
a--can be run on stock fender if u dial in alittle camber and run ap2 tire sizes. u will need a rear roll and bumper tab relocation if u plan on running 225/255 combo or oem alignment specs
b--rear roll and bumper tab relocation and a slight roll/flare on the fronts. expect to run about -2.5 degrees camber or more in back, -2.0 in front.
c--same fender settings as B. -3.0+ degrees camber in back, -2.0 in front
a--can be run on stock fender if u dial in alittle camber and run ap2 tire sizes. u will need a rear roll and bumper tab relocation if u plan on running 225/255 combo or oem alignment specs
b--rear roll and bumper tab relocation and a slight roll/flare on the fronts. expect to run about -2.5 degrees camber or more in back, -2.0 in front.
c--same fender settings as B. -3.0+ degrees camber in back, -2.0 in front
#6