20002point2l

hey guys i have a bunch of oem parts for sale, will sell them real cheap.. buyer pays actual shipping+paypal, can ship ups or usps depending on size ( will choose cheapest) Im available for local pickup in central nj!

OEM

oem map sensor - 35



oem cd changer cable-20

soft top mounting equipment, for around the back of softtop, MINT - 100

trunk springs - 20

oem oil pressure sensor - 25

cruise control unit with cable - 75

oem neg battery terminal ground wire - 20

oem trans mount - 40

oem rotors front and rear(recut and painted black) - 80 for all 4

Ap1 springs (my00) - 40

oem flywheel with 14k - 100

oem heatsheild- 35
oem headsheild cut(for greddy turbo kit)- 20

oem Air Conditioning Setup (Full system, complete w/ belt)- 300,

oem motor mount housings - 35 for both

Aftermarket-

t1r 70mm silencer - 50
45 degree 2.5" stainless intercooler bend with tial 50mm flange-20

12 feet of 4" piping, 3" to 4" reducer and 45 degree 4" bend.. everything needed to make a full 4" exhaust - 150, will ship
20psi autometer boost gauge - 20

aem serial cable - 20

defi boost gauge module - 50

vented/cut hood grills - works great for oem hoods! - 40

oil catch can - works great, compact size with gauge and drain - 50

Hard top stand - padded! originally for porsches, but works fantastic for the s2000 hardtop, mugen style or stock - 120



Will be adding more parts as am cleaning out my garage, list will be updated daily. Any questions pm me and i will respond promptly. Thanks!


MAKE OFFERS!!!

kels_2k

interested in battery relocate kit
will get back to you tomorrow Have to check order already on battery kit.
thanks

20002point2l

sounds good, just let me know!

-Steve

s2kslav

Will take the o2 sensor, it defintelly fully functional, right?

20002point2l

yes, it was working correctly when i took it out of the car, its not needed now with my aem ecu.

20002point2l

bump!

katchup

does the rear brace have all the pieces?

iVTECallday

It uses oem hardware/bolts, just remember to put some felt on the top of the bar where it meets the charcoal canister plate or you'll hear it knocking over bumps.
I used felt and zip ties to hold em together, you'll see what I mean when your installing it.

20002point2l

the rear tie bar is direct bolton, i just used a piece of velcro under the canister bracket and it works 100 percent perfect to stop rattles

20002point2l

a bunch of parts are sold, bump for revised list