Upstate Chat Thread XXI
#631
Registered User
Join Date: Feb 2001
Location: West Henrietta UPSTATE NY
Posts: 58,680
Likes: 0
Received 1 Like
on
1 Post
65k miles on my AP1, 1.5-years of autox lauches and 7-years of track driving, never had a bit of clutch problems, or tranny or diff for that matter
Hope things work out for ya, after all the work you have done to date on that thing it would be nice just to drive it
#632
Former Moderator
hey!
Don't forget to set up the VCR. Practice for Monaco is tomorrow
https://www.s2ki.com/s2000/topic/870...#entry20612468
Don't forget to set up the VCR. Practice for Monaco is tomorrow
https://www.s2ki.com/s2000/topic/870...#entry20612468
#633
Former Moderator
Originally Posted by jsenclosure' timestamp='1306321269' post='20613141
well after a nice night out and running into mcwheel at the bar, i think i toasted my clutch...
input appreciated
input appreciated
65k miles on my AP1, 1.5-years of autox lauches and 7-years of track driving, never had a bit of clutch problems, or tranny or diff for that matter
Hope things work out for ya, after all the work you have done to date on that thing it would be nice just to drive it
Hope you figure it out Jake.
Like Doug says it would be nice to see that car up and running soon. Good luck.
#634
Community Organizer
I'm 99% sure it's the clutch. I go on vacation this weekend, i'll have the parts waiting when i get back and should have a new clutch in it given a few nights after work. So now i'm reading and looking at clutch setups and seeing what i should go with. Moddiction recommended the ACT HD pressure plate with the rest oem, Althought my thought is if already going with the HP pressure plate shouldn't i just go with a 6 disk clutch? I'm going to call up synapse and see what they put in their cars
#635
Registered User
I'm 99% sure it's the clutch. I go on vacation this weekend, i'll have the parts waiting when i get back and should have a new clutch in it given a few nights after work. So now i'm reading and looking at clutch setups and seeing what i should go with. Moddiction recommended the ACT HD pressure plate with the rest oem, Althought my thought is if already going with the HP pressure plate shouldn't i just go with a 6 disk clutch? I'm going to call up synapse and see what they put in their cars
#637
Former Moderator
So you dont get hauled off to jail when caught driving at 128 MPH (in a 45 MPH zone) in a supercar provided by your sponsor
#638
Registered User
Join Date: Feb 2001
Location: West Henrietta UPSTATE NY
Posts: 58,680
Likes: 0
Received 1 Like
on
1 Post
#639
Former Moderator
Originally Posted by aashish2' timestamp='1306335512' post='20613756
wow! that Joe Specht is crazy fast. New Tires expected to arrive today. All four of them at that. Time to call Mike Dillenbeck and schedule an appointment to install the tires.
Awesome vendor!!!
#640
Originally Posted by NH_s2k_Guy' timestamp='1306282320' post='20611820
And did you put it in the dryer? On low I'm guessing?
Do not put the cover in the dryer, even on low
The cover is too big, even in a commercial dryer to move around
You get hot spots because the fabric is not moving, not allowed to move
Heat will do all sorts of damage, remove rain protection, shrinkage, and even melting
These comments are based upon real world experience
My CRX-Si cover is now a tad shorter than it used to be, it saddens me
My S2000 cover is my 2nd one, the 1st one is in a landfill somewhere
I use a leaf blower on the inside, blowing to the outside, to blow the dust out of it
I wash it, more like rinse it with cold water only, in a commercial machine, one of the huge capacity front loaders so the fabric can move around
How about just lightly rinsing it off on the car and letting the sun dry it?
The side that touches the car really doesn't get dirty because it's always put on a totally clean car.