seminolejoeusa

Hey Guys,

I just picked up a used Kenwood Head unit(BT901) off S2Ki..it came with the optional HD radio unit and the PAC. However, Just looking at it is scares me..I thought it would be plug and play be there are so many wires I have no idea where to start!!! If someone can help me out with the install I would greatly appreciate it!!! I am located in Clifton Park.

Thx Joe

Mark355

I just yanked my OEM headunit to do some minor audio stuff. Post a pic of the wires!

seminolejoeusa

Ok Will do...I have an aftermarket Pioneer in now so I am hoping that the process isn't too difficult but there seems to be quite a few cut wires

seminolejoeusa

Pics:

Harness:
[attachment=23677SCN3857.JPG]

Back of unit:
[attachment=23678SCN3858.JPG]

PAC:
[attachment=23679SCN3859.JPG]

HD unit and accessory cables:
[attachment=23680SCN3860.JPG]

Mark355

Damn lol. No idea what to do with that harness. Hopefully Jake will lend his advice.

BM612

That does not look complicated. Looks like everything is there that you need to install. I would run the wies for the hd unit to the passenger side and mount the hd unit under the dash above the passenger side. There is alot of room under the dash and those wires are long enough to get there, you might only have to get an antenna wire extension to run from your existing antenna to the hd unit input.

jsenclosure

When are you available to come and see me and I can install it for you. I live in Glenville
518-727-6006

seminolejoeusa

Thx Jake!!! That would be great..my number is 631-786-2339..I am in Ballston Lake...I really appreciate it!!!