Whose installed their own soft top? Without frame swap.
#11
#12
Former Sponsor
Thread Starter
I am located in Orange County NY. Yeah feel free to come by if anyone would like to check it out. Got Ryan RL1924 coming to help out with the install tomorrow. We'll see how it goes!
If anyone wanted to come help/check it out PM me for address and number etc.
Ray I can definitely save you a piece of it no problem.
#16
Former Sponsor
Thread Starter
Anyone know how important those steel cable straps on the sides are? What would happen if they weren't re used? One side was previously snapped in half. Looks like how I have it now they will be showing on the sides with the new top. Top went up and down perfectly when they were disconnected.
Also the rear 4th bar seems to not go back quite far enough. Do the rear glass conversion straps need to be tighter so they pull it back when top is fully closed?
Also the rear 4th bar seems to not go back quite far enough. Do the rear glass conversion straps need to be tighter so they pull it back when top is fully closed?
#17
The steel cable straps hmm I believe your talking about the tensioners the new top should have them attached I believe, mine did. what year is your S? Mine is a 00 and I went with the glass top so I had to make my own straps to connect the last 2 bars together. When putting the top back just put pressure on the bars with your hands to make sure the front bars foldback or else it will not go back all the way and you wont be able to open the secret compartment. Also did u make straps that attach from the side of the last bar to somewhere behind the seat? Cause that helps pull the bar into its position. Sorry hope this helps pm if you need more clarification i know i wrote alot
#18
Former Sponsor
Thread Starter
We got it all done. Looks great! The wire strap I was talking about does not come with the new tops. it is riveted to the stock frame. At least on my '01 it is. Was able to drill out the rivet and feet it through a part of the new top and then re rivet it back in. The instructions were not correct for attaching the straps for the glass conversion so had to remove them and then re installed with the top up and rear bar pushed as far back as possible. Over all came out awesome! Massive improvement from my busted up plastic window with torn top lol.
#20
Former Sponsor
Thread Starter
Some pics of the before, during and after.
The rear one side is a little bit loose but think it will work itself out after a little while or I will just adjust it a little bit somehow haha.
The rear one side is a little bit loose but think it will work itself out after a little while or I will just adjust it a little bit somehow haha.