Billman Motion S2000 Repair Thread IV
#942
Do u have a website or FB? I need a TCT located Vancouver Canada
#943
Welcome to my new repair thread, #4. Simply leave a quick reply in the box at the bottom of the thread to schedule an S2000 appointment.
Ask about...
- "The once over, difference you can feel" service
- Billman's Generation "X" Production TCT (see below for info)
- All phases of installs and mods
- Elrich Auto Body
- transmission rebuilding, while you wait
- modified soft top latches
All pricing inquiries will be returned via PM....
Billman's Once Over:
Custom Valve adjustment, retainer inspection, & spark plug torque check
Air filter
cabin filter
oil change Mobil1 & PCX filter, or ck oil and fliter torque
dif fluid change with Mobil1 75W90
trans fluid change with NEW Honda MTF
clutch fluid change, clutch adjust, and throttle adjust
brake fluid change with ATE Super Blue
spark plug replacement (Honda S2000 spec'd NGK's, not the ones you buy online)
Tire-saver toe-in adjustment, no alignment needed
Coolant flush
axle nut tsb
IAC rotary valve cleaning
dash removal and bulb replacement for audio, heater, and cluster
Loose 12V outlet fix
wiper inserts
topdown mod
AC mod (02-09)
soft-top anti-rip mod
soft-top anti-rip instruction
check brakes
inspect serp belt
air psi
general check-up
100k pulley inspection
motor mount inspection
camwheel bolt inspection
Priced individually, only services needed are done.
Billman Motion Generation X Modified S2000 TCT (Timing Chain Tensioner)
-3 years in the making...application tuned
-precision machined extended reach housing, restoring factory preload to factory spring rates
-Resets chain guide load to exact factory pressure, where it was when the engine was new
-restores TCT piston positioning in the TCT housing
-restores worm gear positioning in the piston and preload
-linear pressure: tightens as engine RPM increases
-anti-cavitation modification: Oil inflow into the TCT is drawn off a 40 degree internal machined ramp, just as you would pour a drink down the side of a glass. Eliminates air in the TCT, and piston retraction when oil pressure is low at idle.
-ease of install, no retracting bolt. Simply install and pull the pin
-lifetime guarantee, which includes personal technical support to your individual case.
PM for order info...
Ask about...
- "The once over, difference you can feel" service
- Billman's Generation "X" Production TCT (see below for info)
- All phases of installs and mods
- Elrich Auto Body
- transmission rebuilding, while you wait
- modified soft top latches
All pricing inquiries will be returned via PM....
Billman's Once Over:
Custom Valve adjustment, retainer inspection, & spark plug torque check
Air filter
cabin filter
oil change Mobil1 & PCX filter, or ck oil and fliter torque
dif fluid change with Mobil1 75W90
trans fluid change with NEW Honda MTF
clutch fluid change, clutch adjust, and throttle adjust
brake fluid change with ATE Super Blue
spark plug replacement (Honda S2000 spec'd NGK's, not the ones you buy online)
Tire-saver toe-in adjustment, no alignment needed
Coolant flush
axle nut tsb
IAC rotary valve cleaning
dash removal and bulb replacement for audio, heater, and cluster
Loose 12V outlet fix
wiper inserts
topdown mod
AC mod (02-09)
soft-top anti-rip mod
soft-top anti-rip instruction
check brakes
inspect serp belt
air psi
general check-up
100k pulley inspection
motor mount inspection
camwheel bolt inspection
Priced individually, only services needed are done.
Billman Motion Generation X Modified S2000 TCT (Timing Chain Tensioner)
-3 years in the making...application tuned
-precision machined extended reach housing, restoring factory preload to factory spring rates
-Resets chain guide load to exact factory pressure, where it was when the engine was new
-restores TCT piston positioning in the TCT housing
-restores worm gear positioning in the piston and preload
-linear pressure: tightens as engine RPM increases
-anti-cavitation modification: Oil inflow into the TCT is drawn off a 40 degree internal machined ramp, just as you would pour a drink down the side of a glass. Eliminates air in the TCT, and piston retraction when oil pressure is low at idle.
-ease of install, no retracting bolt. Simply install and pull the pin
-lifetime guarantee, which includes personal technical support to your individual case.
PM for order info...
Im trying to order a tct for my ap1 and i would like to know how am i able to order one so i can receive it in the next 3 days???
#945
Registered User
Join Date: Aug 2005
Location: Columbia, MD
Posts: 12,553
Likes: 0
Received 0 Likes
on
0 Posts
Bill.. met you at several events. Fall Colors etc...
My car sits in my garage and gets driven 4-5 times a year. I change my fluids etc.. but maybe it's time for a once over.
2004 s2000 with 60k miles.
My car sits in my garage and gets driven 4-5 times a year. I change my fluids etc.. but maybe it's time for a once over.
2004 s2000 with 60k miles.
#947
My only experience was in the past couple of weeks. Like the old sports adage it was a 110% positive experience. Approximate timeline:
Sunday: ordered the Gen-X TCT.
Tuesday: TCT arrived.
Friday: got around to installing the TCT. Still in dockers and a dress shirt -- yep, it's that type swap. Use a 10mm ratcheting box wrench.
Saturday: shipped core back.
Monday: core refund completed.
My TCT wasn't making any noise (for all I know a previous owner had replaced the OEM unit) and the Gen-X isn't either. Preventive maintenance is preferred to repairs!
-- Chuck
Sunday: ordered the Gen-X TCT.
Tuesday: TCT arrived.
Friday: got around to installing the TCT. Still in dockers and a dress shirt -- yep, it's that type swap. Use a 10mm ratcheting box wrench.
Saturday: shipped core back.
Monday: core refund completed.
My TCT wasn't making any noise (for all I know a previous owner had replaced the OEM unit) and the Gen-X isn't either. Preventive maintenance is preferred to repairs!
-- Chuck
#948
Thanks again Bill for the service! The car drives great, shifting is smooth as butter now.
Truly a great customer experience, always willing to answer any question I had along the way. Bill even replaced one of my OEM center caps because one of mine was not as clean as the others.
PS - the Accord Wagon is going to turn heads! See you Sunday at the Bear Mtn drive!
Truly a great customer experience, always willing to answer any question I had along the way. Bill even replaced one of my OEM center caps because one of mine was not as clean as the others.
PS - the Accord Wagon is going to turn heads! See you Sunday at the Bear Mtn drive!