SI JASON

I dont have a digi just a cell phone. So pics prob wont be that good also i have a comptech intake so i have different houses then stock.

But if you see where the hose comes out of the intake manifold and follow it to the TB then to the valve on the side of the intake mani you can get an idea of what to do.
On the valve you have an in and out house. On the out house it goes under the intake mani towards the block.
Get a two way barbed fitting for that size hose and put it on and snake the house under the intake manifold towards the front of the motor where the coolant comes out of the intake mani.
Then get a piece of hose (the size that's there already) and attach to barbed fitting and to intake mani outlet and your done!
Then remove all the hose's on the valve going to TB or you can leave it.
Oh and just double check to make sure nothing is hitting anything it shouldn't.

drhess06259

does sound easy i am gunna try it also..

TProuty

Hey guys,

I went to do this tonight, and I ran into a issue... lol....

I do not have this hose that the arrow is pointing to...


from here:
https://www.s2ki.com/forums/index.php?showt...0&#entry5987875

TProuty

Its there.... but its not connect to that top bronze pipe... its running under all those bronze pipes just above the belt. to the side of the engine..

did the person who had the car already do this... or this another reason for me to hate Manchester Honda

zzziippyyy

It may have been done, hard to tell wthout seeing it and you Manchester Honda dont you

TProuty

Here is an engine shot. see where the hose goes under all those copper ones.