Mark this thread as Sold
Vortech S/C
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: Los Angeles, CA
Posts: 14,373
Likes: 0
Received 0 Likes
on
0 Posts
Vortech S/C
testing waters to see if any of you locals might be interested in my Vortech S/C. it's an AP2 kit and should yield around 300whp or so. most of you have seen my kit and some have even been in my car for a ride.
I am the original owner of this kit. the Vortech kit has about 25k miles(mostly highway miles). special deal for locals. $2900
note: this kit can work with the AP1 as well..you'll just need to get some larger injectors and an EMS or piggy back..like an emanage ultimate. stock pulley is 4.5" and should be around 10 psi for an AP1
I have everything you need to bolt and go..minus the belt which you can purchase from any auto parts store for a few bucks.
I'd like to give the locals first dibs..also, if someone buys the kit from me, we can have Dave(s2oooNvegas) do the uninstall/install so you won't have any missing parts.
PM if interested.
kit installed on my car
stock boost dyno done last year around april or so. I only have a test pipe and clutch.310whp/206tq
thanks
David
I am the original owner of this kit. the Vortech kit has about 25k miles(mostly highway miles). special deal for locals. $2900
note: this kit can work with the AP1 as well..you'll just need to get some larger injectors and an EMS or piggy back..like an emanage ultimate. stock pulley is 4.5" and should be around 10 psi for an AP1
I have everything you need to bolt and go..minus the belt which you can purchase from any auto parts store for a few bucks.
I'd like to give the locals first dibs..also, if someone buys the kit from me, we can have Dave(s2oooNvegas) do the uninstall/install so you won't have any missing parts.
PM if interested.
kit installed on my car
stock boost dyno done last year around april or so. I only have a test pipe and clutch.310whp/206tq
thanks
David
#6
Registered User
Thread Starter
Join Date: Nov 2005
Location: Los Angeles, CA
Posts: 14,373
Likes: 0
Received 0 Likes
on
0 Posts
not sure yet, but i was thinking maybe a GT2876R..for quick spool..just looking for 370whp or so with a tubular manifold and without HG at around 10psi or so.