Mark this thread as Sold
FS: S2000 RevHard Turbo Kit w/ Garrett GT30 Turbo
06-03-2010, 06:19 PM
#1
Registered User
Thread Starter
Join Date: Nov 2004
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
FS: S2000 RevHard Turbo Kit w/ Garrett GT30 Turbo
This is a high performance turbo kit for a Honda S2000. This is a good kit if you are trying to maintain a stock look on your car (as the intercooler is professionally painted black on the front). I bought this from RevHard for about $4100 shipped. The kit only has 12,7XX miles on it. The garrett GT30 Turbo only has 3,XXX miles on it.
NOTE: This kit boosts 16psi on its current setup because i added a 10lb waste gate spring. If you want to return to the original 7psi setup that was standard with the kit, then you have to take the 10lb spring out of the waste gate. It includes everything below:
Rev Hard™ Cast Iron Manifold
Rev Hard™ Intercooler (28x6.5x3)
Tial Wastegate (16 PSI)
Rev Hard™ Blow-Off Valve
2.25" Mandrel Bent Piping
2.5" Downpipe
Silicone Hoses and Clamps
Steel Braided -3 Oil line
Oil Return Line
Water Cooling Line (for Garrett GT30)
High Pressure Silicon Line
Necessary Vacuum Lines
Necessary Vacuum Tee's
The kit originally came with a RevHard T3/T04 turbo. I sold it and upgraded to a custom Garrett GT30 Dual-Ball Bearing turbo which really made this kit perform to its fullest. I bought this turbo, brand new, for $1200 and i have now included it in the kit.
I have a custom 3" inch exhaust that is included in this package as well. It is a straight pipe from the down-pipe to the tail pipes. This exhaust is very high performance, but also very loud. It has no mufflers or cats. Only 2 glass-packs silence and smoothen the air flow of this exhaust. The noise is tolerable and beastly, but it is still louder than any name brand exhaust. Like i said, a straight pipe that breaks off into two tail pipes.
I'm also including an APEXI turbo-timer with this package.
Lastly, I have RC 750cc Injectors to feed this monster turbo kit. Which is also included in the price.
Price: $2500 obo
I am located in San Jose, CA.
Call or e-mail. Thanks! 408-202-9999 karazya@gmail.com *Serious buyers only* Everything is in good shape, just a little dusty!
NOTE: This kit boosts 16psi on its current setup because i added a 10lb waste gate spring. If you want to return to the original 7psi setup that was standard with the kit, then you have to take the 10lb spring out of the waste gate. It includes everything below:
Rev Hard™ Cast Iron Manifold
Rev Hard™ Intercooler (28x6.5x3)
Tial Wastegate (16 PSI)
Rev Hard™ Blow-Off Valve
2.25" Mandrel Bent Piping
2.5" Downpipe
Silicone Hoses and Clamps
Steel Braided -3 Oil line
Oil Return Line
Water Cooling Line (for Garrett GT30)
High Pressure Silicon Line
Necessary Vacuum Lines
Necessary Vacuum Tee's
The kit originally came with a RevHard T3/T04 turbo. I sold it and upgraded to a custom Garrett GT30 Dual-Ball Bearing turbo which really made this kit perform to its fullest. I bought this turbo, brand new, for $1200 and i have now included it in the kit.
I have a custom 3" inch exhaust that is included in this package as well. It is a straight pipe from the down-pipe to the tail pipes. This exhaust is very high performance, but also very loud. It has no mufflers or cats. Only 2 glass-packs silence and smoothen the air flow of this exhaust. The noise is tolerable and beastly, but it is still louder than any name brand exhaust. Like i said, a straight pipe that breaks off into two tail pipes.
I'm also including an APEXI turbo-timer with this package.
Lastly, I have RC 750cc Injectors to feed this monster turbo kit. Which is also included in the price.
Price: $2500 obo
I am located in San Jose, CA.
Call or e-mail. Thanks! 408-202-9999 karazya@gmail.com *Serious buyers only* Everything is in good shape, just a little dusty!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
asarraf_xz
Forced Induction For Sale
3
07-01-2010 08:16 AM