Mark this thread as Sold
FS: Deep Dish Antera 309's 18x8; 18x10...pics!!!
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: Boston
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
FS: Deep Dish Antera 309's 18x8; 18x10...pics!!!
These wheels have less than 500 miles on them. Flawless condition. Even when they were mounted and balanced, there were very few, if any, wheel weights required depnding on the wheel.
These wheels have a high luster shine from the lip, as there it is a separate piece of stainless steel bonded to the wheel.
They are 18x8 with a 50mm offset, and 18x10 with a 58mm offset. I was running 225/40/18 and 265/35/18. You will need to roll the rear 1/4 panel lip for clearance if the vehicle is lowered, or you can go with a 255/35/18 tire in the rear. I am selling with or without tires. Running Goodyear F1 GS-D3.
Pretty much brand new, I just broke in the tires for ya!! I waited 3 months for the rear wheels to be shipped from Italy. I just have my eye on something else, so i need to sell. Retails for about 600 per wheel plus shipping. Letting them go for $2,200 or 2800 with tires.
More pics can be seen HERE and HERE
These wheels have a high luster shine from the lip, as there it is a separate piece of stainless steel bonded to the wheel.
They are 18x8 with a 50mm offset, and 18x10 with a 58mm offset. I was running 225/40/18 and 265/35/18. You will need to roll the rear 1/4 panel lip for clearance if the vehicle is lowered, or you can go with a 255/35/18 tire in the rear. I am selling with or without tires. Running Goodyear F1 GS-D3.
Pretty much brand new, I just broke in the tires for ya!! I waited 3 months for the rear wheels to be shipped from Italy. I just have my eye on something else, so i need to sell. Retails for about 600 per wheel plus shipping. Letting them go for $2,200 or 2800 with tires.
More pics can be seen HERE and HERE
#5
Registered User
Thread Starter
Join Date: Sep 2002
Location: Boston
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
They are 18x8 with a 50mm offset, and 18x10 with a 58mm offset. I was running 225/40/18 and 265/35/18. You will need to roll the rear 1/4 panel lip for clearance if the vehicle is lowered, or you can go with a 255/35/18 tire in the rear.
i am debating whether or not to get new wheels or go S/C....
#7
Registered User
Thread Starter
Join Date: Sep 2002
Location: Boston
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
I am lowered and I am running 265's. But these are the offsets recommended for the S2000 by Antera. They also recommend 255/35/18's
I can't see Antera recommending a tire/offset size that rubs when at stock height.
So they probably dont rub if not lowered.
Anybody chime in if I'm wrong....
I can't see Antera recommending a tire/offset size that rubs when at stock height.
So they probably dont rub if not lowered.
Anybody chime in if I'm wrong....
Trending Topics
#8
I'm runing the same rims and tire sizes at the stock height. I've had no rubbing. Even over speed bumps, driveway inclines, and a short xcountry parking experience in a grassy field.
However, I got my rims from Tunerworks (www.tunerworks.com) and they rears had the hubs milled so the offset is closer to +62 i believe.
However, I got my rims from Tunerworks (www.tunerworks.com) and they rears had the hubs milled so the offset is closer to +62 i believe.
#10
Registered User
Thread Starter
Join Date: Sep 2002
Location: Boston
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
BeachBum - Tuner works machines the inner wheel hub another 4mm....they do not com elike that from Antera.
FormulaRedS2k - Do you work for a shop?? That is definately a possibility. Antera had a very deep discount a couple of months back for these wheels. If they had them in stock, it was almost 50% off MSRP. Unfortunately....I had to special order them from Italy and waited about 3 months for them. That was a one time deal from Antera. You were lucky.
FormulaRedS2k - Do you work for a shop?? That is definately a possibility. Antera had a very deep discount a couple of months back for these wheels. If they had them in stock, it was almost 50% off MSRP. Unfortunately....I had to special order them from Italy and waited about 3 months for them. That was a one time deal from Antera. You were lucky.