11psiGSR

PRICE DROP

Name: Allan
Location: Atlanta, GA (Dallas/Hiram)
Price: $900 takes both
Contact: Call or text 678.390.zero six eight six, or PM me here.
Will ship? No. Prefer local pickup at this time.

Bought an '01 s2000 a few months ago with the intent on performing a motor swap. I purchased the car with the original F20c sounding as though it has a bad rod bearing. It WILL likely need to be rebuilt, but would make an excellent project motor. See comments below. Both of the below are located North of Atlanta (Dallas/Hiram). Removed from the car and ready for you to pick up.

AP1 F20c (Needs Rebuild) - Removed from a 2001 with roughly 114,000 miles. Does not include harness or exhaust manifold. Will need a rebuild. Did run when removed from vehicle. See video here: YouTube Video of F20c Before Removal

[attachment=23113SC_0009.jpg]
[attachment=23114SC_0010.jpg]
[attachment=23115SC_0012.jpg]

AP1 6 Speed Transmission - Removed from above vehicle. Shifts fine, although due to above motor issue I was never able to drive vehicle.

[attachment=23116SC_0015.jpg]
[attachment=23117SC_0017.jpg]
[attachment=23118SC_0018.jpg]

Thanks for looking. Reach out with any questions.

Norcalnightrider530

bump actually a clean motor right there bad rings or what?

11psiGSR

Thanks! I believe the rod bearings have gone bad. I posted a video of the motor running before I removed it in case someone wanted to see (see top post). The knock was definitely coming from the block and not the head.

I removed it a few weeks ago and cleaned it up. Should make a great project motor for someone.

34witt

How much would the motor cost shipped to 56001?

11psiGSR

Not sure if I would be willing to ship at this point. Would prefer local Atlanta pickup. I'll let you know if this changes.

11psiGSR

Still available and ready for pickup.

11psiGSR

Bump for price drop. $1k takes both. Need these out of my garage.

drtyhatch

do you think a good rotating assembly would fix this longblock i.e. crank and bearings?

11psiGSR

Hi,

I see/hear no reason why it wouldn't. Original owner had it towed to his mechanic once the problem surfaced. I only cranked it two short times after that... once when I was looking at the car and once for the YouTube video (see first post).

That said, I have NOT disassembled the motor to confirm. When I bought the car, I was not interested in the issues with the motor. I purchased with performing a motor swap in mind from the beginning. I only wanted the chassis.

AK_9K_ALL DAY

Bump for importmuscle.com