Mark this thread as Sold
AP2 Engine with Alaniz Ported head
#1
Former Moderator
Thread Starter
AP2 Engine with Alaniz Ported head
This is a used AP2 Engine, from a 2004 US spec S2k. Complete with intake manifold, starter, waterpump, pulleys and AC compressor.
It has a Hondata intake gasket installed, as well as a Toda flywheel. The cylinder head was ported by Joe Alaniz.
It was originally purchased from Hardtopguy as a complete engine/transmission combo, from the train wreck cars. It had under 10 miles when received from HTG. Since then, it had the Alaniz head and Kraftwerks High boost supercharger kit installed.
It had 6K miles put on it SC's, and the car was totaled. Engine ran after the accident, car was not drive able.
The transmission is sold seperately
This is the car the engine was removed from:
Injectors are not included.
I do not want to separate the cylinder head from the engine, so you get a deal on the entire thing. Toda flywheel is included.
I can deliver within 150 miles of Montgomery AL, otherwise it will have to be shipped truck freight, buyer pays actual shipping costs.
Asking $4000 O.B.O.
It has a Hondata intake gasket installed, as well as a Toda flywheel. The cylinder head was ported by Joe Alaniz.
It was originally purchased from Hardtopguy as a complete engine/transmission combo, from the train wreck cars. It had under 10 miles when received from HTG. Since then, it had the Alaniz head and Kraftwerks High boost supercharger kit installed.
It had 6K miles put on it SC's, and the car was totaled. Engine ran after the accident, car was not drive able.
The transmission is sold seperately
This is the car the engine was removed from:
Injectors are not included.
I do not want to separate the cylinder head from the engine, so you get a deal on the entire thing. Toda flywheel is included.
I can deliver within 150 miles of Montgomery AL, otherwise it will have to be shipped truck freight, buyer pays actual shipping costs.
Asking $4000 O.B.O.
#7
Registered User
Join Date: Apr 2008
Location: Ventura, Ca
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
If you are parting out the car I'm interested in the items below.
engine harness (Uncut)
dash harness (Uncut)
ignition plugs
gauge cluster
push button starter
ecu
key-tumbler
engine (complete!)
transmission (complete!)
driveshaft
email me. dougyroy at gmail.com
engine harness (Uncut)
dash harness (Uncut)
ignition plugs
gauge cluster
push button starter
ecu
key-tumbler
engine (complete!)
transmission (complete!)
driveshaft
email me. dougyroy at gmail.com