When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I’m posting this for peace of mind. If I sent a stranger a ton of money I’d want to see this kind of post.
Thank you for the 4400 payment-
Shipping out box today. I’ll provide you a tracking number and I’ll have pics of the open box being duct taped closed. I’ve put in every part I took off, plus I’ll put in an extra box of hose clamps and a bucnch of vacuum lines and zip ties (zip tie the lines so they don’t pop off when they see positive boost pressure. Hopefully you won’t need any extra bits (that’s my goal).
In addition to what is pictured, I pulled the crank pulley and vtec/extender block off of the old motor yesterday and they are fully wrapped in cloth, taped up and are in the box.
Hopefully the crank bolt on your car will cooperate and come off without too much hassle. That’ll be the toughest part of the install. You’ll need to Dremel or file a small bit of your passenger side radiator shroud too allow room for the 1200 to fit properly. Pretty sure the rest is just basic tool kit stuff.
It’s shipped. I also included a new crush washer for the bulkhead fitting (also included)
I put it in the slightly smaller box and the shipping price reduced by $83. I refunded you that difference.
Extras: hose clamps, lots of new vacuum line in two sizes, vacuum line fittings, new crush washer for the oil a/n fitting, zip ties, Teflon tape
08-29-2024, 10:05 AM
