Al3x_666

Can I get the Carbing cooling plate if I have the SPOON Snorkel. On the picture, the cooling plate seems to have a hole for this.


http://www.evasivemotorsports.com/merchant...RBING-421-034-0

''Straight from Japan, Carbing cooling plate are made from the highest quality aluminum. By preventing air to escape over the top of the radiator, this cooling plate reduces coolant temperature during track runs and high speed driving. *Also available in carbon fiber for some models.''

Thanks every one.

kenstyle

That one won't fit your snorkel. You need to find the plate that has a trapezoidal shape like this < >, rather than a square cutout.

https://www.s2ki.com/forums/index.ph...pic=296875&hl=

zbrewha863

The plate in that link has been cut, someone even says so in one of the posts a little further down. You have to cut it no matter what. I know b/c I used to run a Spoon snorkel with a Carbing Carbon Fiber cooling plate, and I had to cut the plate to make it fit. If you have good fabbing skills then it is no problem, but remember that you will be basically ruining the plate (and thus resale value) unless you can sell it with the snorkel or to someone who has a Spoon snorkel.

silentdancer

i have a carbing cooling plate that was cut for the spoon snorkel. pm me if you want it. =]

Al3x_666

If you can ship to CANADA!

zbrewha863

Wow, this is probably one of the most efficient threads I've ever seen on s2ki.com!

Al3x_666

Witch cooling plate have the right hole for the SPOON sorkel ??

Al3x_666

zbrewha863

APR makes one that has a hole for a Spoon snorkel, and S2X might but I'm not 100% sure. Neither one of those companies is JDM, but I know that APR makes nice products

Al3x_666

The carbon kevlar is nice but no hole for the snorkel! The carbon have an hole but he looks tight.

http://www.autocarparts.com/part/1484/3/

Some feedback about the APR or CUSCO cooling plate ?


this one is custom fit?