ASM Recaro RSG's
03-01-2007 | 06:40 AM
#11
Registered User
Joined: Nov 2000
Posts: 1,029
Likes: 0
From: Europe
Originally Posted by medicalstudent,Feb 25 2007, 01:38 AM
Not sure. The main issue is where the bolts from the rail goes into the seats. I'm hedging to say that the Bride rails may not work with the Recaros without custom-fabrication (unless they're Recaro rails badged as Bride). The lowering rails on mine are also from Recaro. Stock seat belt harnesses can be used even though I won't.
Those ASM rails you mentioned above are for all the Recaros seats, like the pole position, SPG
03-02-2007 | 05:34 AM
#14
Joined: Aug 2006
Posts: 3,214
Likes: 32
From: Huntsville, AL
If you want a FIA seat do not go with the GIAS/STRADIS they do not meet FIA requirements.
I have never seen a seat that is reclineable meet FIA requirements.
Bride FIA seats
Zeta III standard is FIA (checking on the Type L to see if it is also FIA)
MAXIS III
GARDIS III
Also look at Racetech seats.
I got a chance to sit in the 4009WHR (wide version with helmet restraint padding) which is 16.2" inside hip width and surprisingly it was real comfortable.
I am 5'8' 260LBS 38" waist and I could have sat in the seat for hours.
The 4009W (wideversion)is only 16" inside hip dimension but the shells are the same so there is slightly more padding in the 4009W.
Only problem with them is the shoulder bolster will need to be trimmed down a bit.
They measure 24
I have never seen a seat that is reclineable meet FIA requirements.
Bride FIA seats
Zeta III standard is FIA (checking on the Type L to see if it is also FIA)
MAXIS III
GARDIS III
Also look at Racetech seats.
I got a chance to sit in the 4009WHR (wide version with helmet restraint padding) which is 16.2" inside hip width and surprisingly it was real comfortable.
I am 5'8' 260LBS 38" waist and I could have sat in the seat for hours.
The 4009W (wideversion)is only 16" inside hip dimension but the shells are the same so there is slightly more padding in the 4009W.
Only problem with them is the shoulder bolster will need to be trimmed down a bit.
They measure 24
03-06-2007 | 12:17 AM
#18
Registered User
Joined: Nov 2000
Posts: 1,029
Likes: 0
From: Europe
Originally Posted by TrackStar,Mar 5 2007, 09:59 PM
They don't work for stock seats if thats what you're asking
i wanna know if i put some recaro spg seats with these rails, if these are just plug and play and will attached in the stock holes of if i need to do any extra work ?Thanks in advance for the ones who can help me
03-06-2007 | 06:35 AM
#20
Registered User
Joined: May 2002
Posts: 14,402
Likes: 2
From: Mugen
Originally Posted by vanowen,Mar 6 2007, 12:51 AM
Do you have more pictures of your car?