Any dyno numbers on the Mugen 2.2 header
#2
Registered User
Thread Starter
They claim 10 hp on a stock 04',but that dyno chart looks like anything but stock.Where is the jump at vtec? Be really nice if someone gave a real comparison.
http://www.evasivemotorsports.com/Merchant...R&Store_Code=EM
http://www.evasivemotorsports.com/Merchant...R&Store_Code=EM
#3
working on the numbers for everyone
current mod list with some of the stuff going on next weekend
the only deltas between my pre and post dynos will be the
Mugen 2.2 Header
Mugen Pressure Plate
New OEM disk
Comptech Flywheel
and SS clutch lines
and the clutch delay mod
The greddy is not plugged in specifically to get a accurate pre and post dyno results for the header.
After then headers are on and dynoed the next step is to get modify water temp driver installed to feed the greddy for A/F feedback loop I will redyno with tuning added on.
Then a custom CF/Kevlar intake system very similar to the K&N setup with a Spoon snorkel and enclosed box and a retune.
current mod list with some of the stuff going on next weekend
the only deltas between my pre and post dynos will be the
Mugen 2.2 Header
Mugen Pressure Plate
New OEM disk
Comptech Flywheel
and SS clutch lines
and the clutch delay mod
The greddy is not plugged in specifically to get a accurate pre and post dyno results for the header.
After then headers are on and dynoed the next step is to get modify water temp driver installed to feed the greddy for A/F feedback loop I will redyno with tuning added on.
Then a custom CF/Kevlar intake system very similar to the K&N setup with a Spoon snorkel and enclosed box and a retune.
#4
Originally Posted by archtop,Oct 16 2006, 08:23 PM
They claim 10 hp on a stock 04',but that dyno chart looks like anything but stock.Where is the jump at vtec? Be really nice if someone gave a real comparison.
http://www.evasivemotorsports.com/Merchant...R&Store_Code=EM
http://www.evasivemotorsports.com/Merchant...R&Store_Code=EM
Guess we will see in the coming weeks.
#6
Mugen 2.2L header
Mugen Pressure plate
Comptech Flywheel
Omni Short Clutch master cylinder
and King SS braided Clutch line
go on tommrow morning
+ the Cluthc delay vlave mod
Mugen Pressure plate
Comptech Flywheel
Omni Short Clutch master cylinder
and King SS braided Clutch line
go on tommrow morning
+ the Cluthc delay vlave mod
Trending Topics
#9
Registered User
Thread Starter
Originally Posted by MugenRioS2k,Oct 21 2006, 07:35 AM
Mugen 2.2L header
Mugen Pressure plate
Comptech Flywheel
Omni Short Clutch master cylinder
and King SS braided Clutch line
go on tommrow morning
+ the Cluthc delay vlave mod
Mugen Pressure plate
Comptech Flywheel
Omni Short Clutch master cylinder
and King SS braided Clutch line
go on tommrow morning
+ the Cluthc delay vlave mod
#10
Got the clutch, flywheel and the header installed.
Ran out of time at the dealership on Saturday so we had to start putting everything back together a bit early. Had to put everything back together to make the car drivable since I drove 2.5hrs to Will
Ran out of time at the dealership on Saturday so we had to start putting everything back together a bit early. Had to put everything back together to make the car drivable since I drove 2.5hrs to Will