chemr16

Hey guys im sure that you have all read my other thread about the rear tire issue...so i plugged it and everything and it was running good but now its leaking again so what i am thinking is that either the rim is bent, i didnt seal it good enough or there is another leak somewhere...i am going to check again today to see if i can find another hole on it...but what im asking is if someone could possibly help me out until i can get a new complete set of rims and tires...does anyone have AP1 V1's that i could borrow until that happens

This is the combination that i am looking at getting when i can afford it

Enkei RPF1's bright silver 17x7.5 front and 17x9 rear with 48mm offset in the front and 45mm offset in the rear

im not too sure about the tire sizes though im thinking 205 in the front and 245 in the rear...as far as the rest of the sizes i dont know which is right

or if anyone knows anybody that is selling some V1's for a low low price

chemr16

and what sucks is that there is an ad on craigslist for someone selling theirs for 200 bucks but they never answer the phone and never return my calls

bouford

good luck tyler. you should be able to run 215 front and 245 rear with those offsets. probably wont be able to slam the car though. here is the guide i used:

https://www.s2ki.com/forums/index.php?showtopic=342793

chemr16

well he just called me back and said that he already sold them so well im SOL right now

bouford

you can buy these :

http://honolulu.craigslist.org/oah/pts/934690139.html

not sure about the offsets.

chemr16

yea i was looking at those...really nice deal and they look clean as hell...problem is i dont have 1100 just sitting around which is why i was hoping for a temp fix until i can buy some new wheels and tires...it would take me a long time to get that taken care of...or i could just always get a new tire ordered which would be a whole hell of a lot cheaper and i could easily do that next month depending on the price for a falken

JustinsanE

215f255 rear!!! I love mine!!!

Might have to roll fenders if lowered though.....

You better not powder coat em black though because then you will just be copying me.....

jzz30

the rear fenders will have to be rolled but you can slam the car if you want because the front offsets are not that aggressive. personally i would go with a wider front.

8overgixxer

ikey's got a set of ap1 rims for like $250 on CL iirc.

chemr16

i didn't see those just the ones in kapolei and then integlspwr has ap 2 ones going for780.00