SOLD

 

Does any thing have to be relocated to run this intake manifold?

 

Your charge pipe will need to move; this manifold is not as long as the factory IM.

 

^what he said bump.

 

The FB manifold is longer than oem not shorter, you will need to cut your charge pipe down about 1 1/2 or 2 1/2 inches.

 

I think he meant the runners are shorter so the charge pipe needs to move closer towards the block

 

I see but the pipe does not move closer to the block, the plenum is so much wider it makes up for it. The charge pipe is in the same location as the oem manifold just needs to be cut down it a bit.

 

ive always been interested in this intake manifold. I also think it may help with my SC kit.
bump for you, GLWS!

 

I'm going to buy a Gizzmo Intake Manifold gasket and on each side I will use a new OEM gasket, this will move the FB IM a little further out, hopefully almost far enough for my Vortech Aftercooler position.
I'll be able to make it fit :-D

 

As of now pending. Someone locally here in SoCal wants to pick up this monday. I keep my word and will hold for him til Monday.