Mark this thread as Sold
greddy turbo + upgrades
07-01-2012, 05:40 PM
#1
Registered User
Thread Starter
Join Date: Dec 2006
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
greddy turbo + upgrades
So I am taking my greddy kit off and am going back to N/A for the time being because we are moving and need to free some extra cash up. I have a full greddy turbo kit still on the car today that I am going to pull for the right buyer. Feel free to come by and check it out! 
I am located in the Woodland/Davis area just West of Sacramento. Here are some of the details.
Greddy Turbo kit in great condition with nothing wrong... Not smoke, no shaft play etc... It is a weekender for me. I just bought and installed a new PFAB replacement manifold that is only a month old. The greddy cast cracked as they all do so that is already taken care of for you. While it was apart port matched and polished the exhaust side of the turbine and the wastegate. It spools up much smoother and boost holds better than the stock kit did.
-Comes with everything you need bolt on and run.
-RC 550cc injectors
-emanage ultimate with a tune on it from blacktrax as well as the base map.
-greddy Down Pipe
-greddy front mount with charge piping
-greddy turbo charger
-greddy oil relocation kit with upgraded lines
-added a greddy type S blow off valve.
-The greddy cast manifold cracked and I just added a brand new PFAB replacement, both come with so you can do what ever you want with the greddy cast.
-Custom 3" large mouth Down Pipe in addition to the greddy one.
The car runs great with this setup and is really quick on the street. I am asking 2600 with all the goodies ready to bolt on and have a blast.
[attachment=22979
hoto-21.JPG]
[attachment=22980hoto-20.JPG]
[attachment=22981hoto-18.JPG]
[attachment=22982hoto-19.JPG]
[attachment=22983hoto-23.JPG]
[attachment=22984hoto-22.JPG]
I am located in the Woodland/Davis area just West of Sacramento. Here are some of the details.Greddy Turbo kit in great condition with nothing wrong... Not smoke, no shaft play etc... It is a weekender for me. I just bought and installed a new PFAB replacement manifold that is only a month old. The greddy cast cracked as they all do so that is already taken care of for you. While it was apart port matched and polished the exhaust side of the turbine and the wastegate. It spools up much smoother and boost holds better than the stock kit did.
-Comes with everything you need bolt on and run.
-RC 550cc injectors
-emanage ultimate with a tune on it from blacktrax as well as the base map.
-greddy Down Pipe
-greddy front mount with charge piping
-greddy turbo charger
-greddy oil relocation kit with upgraded lines
-added a greddy type S blow off valve.
-The greddy cast manifold cracked and I just added a brand new PFAB replacement, both come with so you can do what ever you want with the greddy cast.
-Custom 3" large mouth Down Pipe in addition to the greddy one.
The car runs great with this setup and is really quick on the street. I am asking 2600 with all the goodies ready to bolt on and have a blast.
[attachment=22979
hoto-21.JPG][attachment=22980
hoto-20.JPG][attachment=22981
hoto-18.JPG][attachment=22982
hoto-19.JPG][attachment=22983
hoto-23.JPG][attachment=22984
hoto-22.JPG]
07-03-2012, 01:08 PM
#6
Registered User
Thread Starter
Join Date: Dec 2006
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
This kit will do anywhere from 280-300 whp... Some have gone upwards of 330... I am making a conservative 280-290 wheel and 220tq. The beauty is I have full torque at just below 4k. incredibly fun and this kit is nicely upgraded.
incredibly fun and this kit is nicely upgraded.
