Mark this thread as Sold
Greddy Ap1 Turbo kit w/extras
03-14-2013, 04:09 PM
#1
Registered User
Thread Starter
Greddy Ap1 Turbo kit w/extras
Started a new thread just for my turbo kit.
I am selling this kit that was intended for a friend. He bailed out on me after I purchased it so its been sitting in my garage. Previous owner said it has less than 5k miles on the kit before he took it off.
I am local to Dallas TX and prefer pick-up. Can ship at buyers expense but it might not be cheap due to size and weight.
Asking $2450 + shipping, and any PP fees if by PP.
-------------------------------------------------------------------------------------------------------------------------
Ap1 Turbo kit with < 5k miles on the kit. I do not know what is needed to fit an Ap2 (I heard a simple wiring change and maybe diff injectors)
-Greddy Turbo
-Greddy Intercooler - Painted black
-Intercooler piping with BOV
-Pfab manifold and Greddy manifold, the Greddy manifold was cracked and rewelded
-Injectors with pig tails
-Emanage (has stock tune, HIGHLY recommend that you re-tune)
-Hardware, Gaskets, Couplers, Clamps
-Spark Plugs
-Downpipe
-Oil filter relocation kit + lines
-Air filter
-Air diversion plate
Extras
-A Pillar dual gauage pod
-AEM AF ratio gauge
-Autometer boost gauge
This kit is complete minus the fuel pump, which can be bought for a fairly low price. Like any used turbo kit, you might have to run to the parts store to fetch a bolt or two.
I am selling this kit that was intended for a friend. He bailed out on me after I purchased it so its been sitting in my garage. Previous owner said it has less than 5k miles on the kit before he took it off.
I am local to Dallas TX and prefer pick-up. Can ship at buyers expense but it might not be cheap due to size and weight.
Asking $2450 + shipping, and any PP fees if by PP.
-------------------------------------------------------------------------------------------------------------------------
Ap1 Turbo kit with < 5k miles on the kit. I do not know what is needed to fit an Ap2 (I heard a simple wiring change and maybe diff injectors)
-Greddy Turbo
-Greddy Intercooler - Painted black
-Intercooler piping with BOV
-Pfab manifold and Greddy manifold, the Greddy manifold was cracked and rewelded
-Injectors with pig tails
-Emanage (has stock tune, HIGHLY recommend that you re-tune)
-Hardware, Gaskets, Couplers, Clamps
-Spark Plugs
-Downpipe
-Oil filter relocation kit + lines
-Air filter
-Air diversion plate
Extras
-A Pillar dual gauage pod
-AEM AF ratio gauge
-Autometer boost gauge
This kit is complete minus the fuel pump, which can be bought for a fairly low price. Like any used turbo kit, you might have to run to the parts store to fetch a bolt or two.
03-17-2013, 11:19 PM
#5
Registered User
Join Date: Nov 2011
Location: Glendora, Ca
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
I wonder how hard this would be to put into an AP2. Do you know where i can look before i buy ? I have been looking on the website but it doesn't really tell me much. I am very interested in your kit. And i would need it shipped if your willing to ship.
03-18-2013, 05:25 AM
#6
Registered User
Thread Starter
I know the Greddy EManage needs to be wired slightly different
https://www.s2ki.com/s2000/topic/647...bo-kit-thread/
And judging by the thread, injectors fit for 00-2005. I would say just those two things are what you need to make it work but I would verify with someone in the forced induction thread.
https://www.s2ki.com/s2000/topic/647...bo-kit-thread/
And judging by the thread, injectors fit for 00-2005. I would say just those two things are what you need to make it work but I would verify with someone in the forced induction thread.
Trending Topics
03-18-2013, 11:09 AM
#8
Registered User
Thread Starter
There is a very slight side to side shaft play on this turbo, but from everything I've read from the owners of this turbo kit (even when its new), that is common and fine as long as it doesnt have any play when you push or pull on the turbine.
