Mark this thread as Sold
FS: S2000 Turbo Kit
#3
Thread Starter
Join Date: Sep 2005
Location: Depths of the east Valley
Posts: 893
Likes: 0
Received 2 Likes
on
1 Post
Its a straight T3 turbo and not sure on the specs. It was a custom turbo when it was new and i cant remember the specs. The car made 325 on 8.5 psi. I didnt push it any further as i was on stock block and didnt want to push it as the power level was great for where it was at. You could get more out of it if you wanted to push it a little further than i did.
#5
Thread Starter
Join Date: Sep 2005
Location: Depths of the east Valley
Posts: 893
Likes: 0
Received 2 Likes
on
1 Post
No its not generic just cant find the info on it. If you read the post above it was designed by us a ScienceofSpeed like 7 years ago and the person that knows all the specs from the original design is gone and unfortunately all the markings were polished off the housing and i cant seem to find any marking any where on the turbo. I believe its a Turbonetics turbo but then again not a 100%. I have had 3 different people look at it (AGP Turbo,Full-Race, and independent turbo builder) all look at it and all said the same. Looks like a hybrid T3. Meaning they have no clue as the inlet and outlets are different from what they have seen. The downpipe is a 4 bolt design of the exhasut housing and the inlet side has a 90 degree welded on it so the number has been removed for sizing. I will try and take some close photos of the kit today and post up as the kit is off the car and ready to go.
Trending Topics
#9
Maybe you should save a few hundred more and pay closer to the asking price considering what it will cost to ship this.
If you're going FI a few hundred bucks shouldn't kill you or you're going to have much bigger head aches down the line.
If you're going FI a few hundred bucks shouldn't kill you or you're going to have much bigger head aches down the line.