Mark this thread as Sold
CA: Miss S2k's Garage Sale (AEM EMS, ID 2000's, Asura Header, Defi Gauges)
06-27-2012 | 06:40 PM
#1
Thread Starter
Registered User
Joined: Oct 2007
Posts: 2,152
Likes: 0
From: SloCal
CA: Miss S2k's Garage Sale (AEM EMS, ID 2000's, Asura Header, Defi Gauges)
First Name: Karla
Price: Price varies per part. See below.
Location: Trabuco Canyon, California
Contact: PM is preferred.
Part: Asura Radiator with SPAL Fans
Price: $375OBO (I paid 1000 new)
Description: Condition is "like-new." They were used on my setup for approx 1k miles before I decided to part out.
Part: Amuse R1 Titanium Exhaust w/ Resonator
Price: $975OBO
Description: Exhaust is in good condition, but has some minor dents at the tip and piping- Not so noticeable when it is mounted onto the car and absolutely does not affect the performance.
This is the quietest titanium exhaust that I've had the pleasure of owning. It absolutely does NOT drone and is extremely lightweight. Only selling because I want to get a 70mm exhaust.
SOLD items:
-->Part: AUTHENTIC Mugen Hardtop in Black with OEM Hardware
Price: $3500....SOLD
Description: Condition is godly- 10 out of 10. Never mounted on the car. Meticulously painted by M-1 Automotive. Seriously, I made them repaint it 4 times until it was PERFECT.
-->Part: Work Meister S1 3pc mounted on Dunlop Direzza DZ101
Price: $3400 (I paid $3700 new plus 4 months wait time)
Description:
--In MINT condition 9.5/10
--Tires have roughly 1,000 and minimal camber wear
--S1's are in burning black with black rivets
--Fronts are 18x9.5 +37 on 225/40/R18 (running -2.7 degrees camber)
--Rears are 18x10.5 +37 on 255/35/R18 (running -3.9 degrees camber)
--**Please note that fender work (rolling) will be required**
--Additional wheel/tire pictures available upon request.SOLD!!
-->Part: Invidia V2 Dual Exhaust
Price: $250
Description: Condition is about a 6.5 out of 10. It's nice overall, but there are scratches on the bottom.
SOLD!!
-->Part: Samco Radiator Hoses with water temperature sensor adaptor.... SOLD!
Price: $100 (I paid $140+$20 for the adaptor)
-->Part: Spoon Radiator Stays...SOLD
Price: $40 OBO (Retail is $60)
Description: Few scratches from being mounted and unmounted (as pictured), but in overall good condition.
-->Part: Buddy Club N+ Spec Coilovers
Price: $750 OBO
Description: Coils have roughly 30,000 miles on them. SOLD!
-->Part: Tial Q BOV
Price:$230 $180 (I paid $280 new)
Description: Condition is "like-new" with less than 1,000 miles on it.SOLD!
-->Part: Setrab Oil Cooler with M22 to 10AN adaptors and 10AN inlet/outlet lines
Price: $250 (I paid $230 for the unit + $20 for the adaptors + $50 for the lines= $300)
Description: Condition is "like-new" and was used for less than 1,000 miles. SOLD!
-->Part: Canton Oil Cooler Thermostat & Fittings/Lines
Price: $200 (Retail is $210 plus fittings and lines)
Description: Condition is "like-new" and was used for less than 1,000 miles. SOLD!
-->Part: Asura 3" Dual Exhaust
Price: $850 (I paid $1100 new)
Description: Condition is 8.5/10. Less than 1,000 miles on it, but some scratches from being lowered. SOLD!
-->Part: AEM EMS 1052 V1
Description: In perfect working order. Used on my car for approx 1k miles. Comes with EMS and cables to connect to laptop. SOLD!
Price: Price varies per part. See below.
Location: Trabuco Canyon, California
Contact: PM is preferred.
Part: Asura Radiator with SPAL Fans
Price: $375OBO (I paid 1000 new)
Description: Condition is "like-new." They were used on my setup for approx 1k miles before I decided to part out.
Part: Amuse R1 Titanium Exhaust w/ Resonator
Price: $975OBO
Description: Exhaust is in good condition, but has some minor dents at the tip and piping- Not so noticeable when it is mounted onto the car and absolutely does not affect the performance.
This is the quietest titanium exhaust that I've had the pleasure of owning. It absolutely does NOT drone and is extremely lightweight. Only selling because I want to get a 70mm exhaust.
SOLD items:
Price: $3500....SOLD
Description: Condition is godly- 10 out of 10. Never mounted on the car. Meticulously painted by M-1 Automotive. Seriously, I made them repaint it 4 times until it was PERFECT.
Price: $3400 (I paid $3700 new plus 4 months wait time)
Description:
--In MINT condition 9.5/10
--Tires have roughly 1,000 and minimal camber wear
--S1's are in burning black with black rivets
--Fronts are 18x9.5 +37 on 225/40/R18 (running -2.7 degrees camber)
--Rears are 18x10.5 +37 on 255/35/R18 (running -3.9 degrees camber)
--**Please note that fender work (rolling) will be required**
--Additional wheel/tire pictures available upon request.
Price: $250
Description: Condition is about a 6.5 out of 10. It's nice overall, but there are scratches on the bottom.
Price: $100 (I paid $140+$20 for the adaptor)
Price: $40 OBO (Retail is $60)
Description: Few scratches from being mounted and unmounted (as pictured), but in overall good condition.
Price: $750 OBO
Description: Coils have roughly 30,000 miles on them.
Price:
Description: Condition is "like-new" with less than 1,000 miles on it.
Price: $250 (I paid $230 for the unit + $20 for the adaptors + $50 for the lines= $300)
Description: Condition is "like-new" and was used for less than 1,000 miles.
Price: $200 (Retail is $210 plus fittings and lines)
Description: Condition is "like-new" and was used for less than 1,000 miles.
Price: $850 (I paid $1100 new)
Description: Condition is 8.5/10. Less than 1,000 miles on it, but some scratches from being lowered.
Description: In perfect working order. Used on my car for approx 1k miles. Comes with EMS and cables to connect to laptop.
